| Item | Centrifugal Pump |
| Amps | 21A |
| Bearing Type | Ball |
| Best Efficiency Flow | 77 GPM |
| Best Efficiency Flow Range @ Head | 45 to 100 GPM @ 100 to 160 ft. |
| Best Efficiency Flow Rate @ Head | 77 GPM @ 136 ft. |
| Best Efficiency Head | 136 ft. |
| Compatible Discharge Pipe Size | 1" |
| Compatible Intake Pipe Size | 2" |
| Drain Plug | Easily Accessible |
| Duty Cycle | Continuous |
| For Use With Potable Systems | Yes |
| Frame | 184 |
| Grade | Grade 316 |
| Height | 9 1/2" |
| Housing Material | Cast Iron |
| Hp | 5 hp |
| Impeller Dia. | 6 4/9" |
| Impeller Material | Bronze |
| Impeller Type | Closed |
| Inlet Pressure | 100 psi |
| Length | 24 2/3" |
| Max. Case Pressure | 175 psi |
| Max. Flow Rate | 95 GPM |
| Max. Flow Rate @ 100 Ft. | 110 GPM |
| Max. Flow Rate @ 110 Ft. | 100 GPM |
| Max. Flow Rate @ 120 Ft. | 70 GPM |
| Max. Flow Rate @ 130 Ft. | 82 GPM |
| Max. Flow Rate @ 140 Ft. | 72 GPM |
| Max. Flow Rate @ 160 Ft. | 40 GPM |
| Max. Flow Rate @ Head | 95 GPM @ 135 ft. |
| Max. Head | 160 ft. |
| Max. Liquid Temp. | 212°F |
| Max. Operating Pressure | 74 psi |
| Max. Solid Dia. | None |
| Media Type | Water |
| Min. Flow Rate | 42 GPM |
| Min. Flow Rate @ Head | 20 GPM @ 165 ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Type | Totally Enclosed Fan Cooled |
| Mounting Orientation | Horizontal |
| Phase | 1 |
| Port Rotation | Four Position |
| Rpm | 3500 RPM |
| Screw Material | Stainless Steel |
| Seal Application | Long Life When Not Run Dry Or Pumping Abrasives |
| Seal Material | Buna Elastomer, Carbon Ceramic, Stainless Steel |
| Seal Type | Mechanical Carbon On Ceramic |
| Self Priming | Manual |
| Series | 3656 Series |
| Service Factor | 1.15 |
| Shaft Material | Stainless Steel |
| Shut Off Pressure | 175 psi |
| Specific Gravity | 1.1 |
| Type | High Head |
| Voltage | 230V AC |
| Volute Material | Cast Iron |
| Wetted Material | Bronze, Buna N, Carbon Ceramic, Stainless Steel |
| Width | 8 3/5" |
| Compatible With Media Type | Water |
| Connection Type | NPT |
| Discharge Type | NPT |
| Flow Rate (maximum) | 95 GPM |
| Flow Rate (minimum) | 42 GPM |
| Frequency | 60 Hz |
| Horsepower | 5 hp |
| Maximum Feet Of Head | 160 ft. |
| Maximum Flow Rate @ 120 Feet Of Head | 70 GPM |
| Maximum Flow Rate @ 140 Feet Of Head | 75 GPM |
| Maximum Flow Rate @ 160 Feet Of Head | 40 GPM |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Nameplate Voltage | 230V AC |
| Overall Height | 9 1/2" |
| Overall Length | 24.7" |
| Overall Width | 8 3/5" |
| Priming | Manual |
| Pump Housing Material | Cast Iron |
| Rpm (maximum) | 3500 RPM |
| Specific Gravity (maximum) | 1.1 xg |
| Standards | ANSI 61, NSF CERTIFIED |
