| Item | Centrifugal Pump |
| Amps | 14/7A |
| Bearing Type | Ball |
| Best Efficiency Flow Rate | 35 GPM |
| Best Efficiency Flow Rate @ Head | 35 GPM @ 50 ft. |
| Best Efficiency Head | 50 ft. |
| Best Efficiency Range Gpm @ Head | 30-60 GPM @ 45-60 ft. |
| Compatible Intake Pipe Size | 2" |
| Discharge Size | 1" |
| Discharge Type | NPT |
| Drain Plug | Easily Accessible |
| Duty Cycle | Continuous |
| For Use With Potable Systems | Yes |
| Frame | 143 |
| Grade | Grade 300, Grade 316 |
| Height | 8 1/2" |
| Housing Material | Cast Iron |
| Hp | 1 hp |
| Impeller Dia. | 4 1/16" |
| Impeller Material | Bronze |
| Impeller Type | Closed |
| Inlet Pressure | 100 psi |
| Intake Type | NPT |
| Length | 24 2/3" |
| Max. Case Pressure | 175 psi |
| Max. Flow Rate | 55 GPM |
| Max. Flow Rate @ 40 Ft. | 60 GPM |
| Max. Flow Rate @ 50 Ft. | 40 GPM |
| Max. Flow Rate @ 60 Ft. | 24 GPM |
| Max. Flow Rate @ Head | 55 GPM @ 40 ft. |
| Max. Head | 65 ft. |
| Max. Liquid Temp. | 212°F |
| Max. Motor Speed | 3450 RPM |
| Max. Operating Pressure | 28 psi |
| Media Type | Water |
| Min. Flow Rate | 15 GPM |
| Min. Flow Rate @ Head | 20 GPM @ 56 ft. |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Type | Totally Enclosed Fan Cooled |
| Mounting Orientation | Horizontal |
| Phase | 1 |
| Port Rotation | Four Position |
| Rpm | 3500 RPM |
| Screw Material | Stainless Steel |
| Seal Application | Long Life When Not Run Dry Or Pumping Abrasives |
| Seal Material | Buna Elastomer, Carbon Ceramic, Stainless Steel |
| Seal Type | Mechanical |
| Self Priming | Manual |
| Series | 3656 Series |
| Service Factor | 1.15 |
| Shaft Material | Stainless Steel |
| Shaft Size | 7/8" |
| Shut Off Pressure | 175 psi |
| Specific Gravity | 1.1 |
| Type | Centrifugal |
| Voltage | 115/230V AC |
| Volute Material | Cast Iron |
| Wetted Material | Bronze, Buna N, Carbon Ceramic, Stainless Steel |
| Width | 6 1/2" |
| Best Efficiency Flow | 35 GPM |
| Compatible Discharge Pipe Size | 1" |
| Compatible With Media Type | Water |
| Connection Type | NPT |
| Flow Rate (maximum) | 55 GPM |
| Flow Rate (minimum) | 15 GPM |
| Frequency | 60 Hz |
| Horsepower | 1 hp |
| Maximum Feet Of Head | 65 ft. |
| Maximum Flow Rate @ 40 Feet Of Head | 55 GPM |
| Maximum Flow Rate @ 50 Feet Of Head | 40 GPM |
| Maximum Flow Rate @ 60 Feet Of Head | 0 GPM |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Nameplate Voltage | 115/230V AC |
| Overall Height | 8 1/2" |
| Overall Length | 24.7" |
| Overall Width | 6 1/2" |
| Priming | Manual |
| Pump Housing Material | Cast Iron |
| Rpm (maximum) | 3500 RPM |
| Specific Gravity (maximum) | 1.1 xg |
| Standards | ANSI 61, NSF CERTIFIED |
