| Item | Centrifugal Pump |
| Amps | 8.7-9/17.4A |
| Bearing Type | Ball |
| Best Efficiency Flow | 35 GPM |
| Best Efficiency Flow Range @ Head | 20 to 48 GPM @ 100 to 60 ft. |
| Best Efficiency Flow Rate @ Head | 35 GPM @ 85 ft. |
| Best Efficiency Head | 85 ft. |
| Compatible Discharge Pipe Size | 1" |
| Compatible Intake Pipe Size | 1 1/4" |
| Design | 56J |
| Drain Plug | All Position |
| Duty Cycle | Continuous |
| For Use With Potable Systems | Yes |
| Frame | 56J |
| Grade | Grade 316 |
| Height | 8 1/5" |
| Housing Material | Cast Iron |
| Hp | 1 hp |
| Impeller Dia. | 5 1/8" |
| Impeller Material | Bronze |
| Impeller Type | Closed |
| Inlet Pressure | 55 psi |
| Length | 17 1/3" |
| Max. Case Pressure | 125 psi |
| Max. Flow Rate | 55 GPM |
| Max. Flow Rate @ 100 Ft. | 21 GPM |
| Max. Flow Rate @ 30 Ft. | 57 GPM |
| Max. Flow Rate @ 40 Ft. | 55 GPM |
| Max. Flow Rate @ 50 Ft. | 52 GPM |
| Max. Flow Rate @ 60 Ft. | 49 GPM |
| Max. Flow Rate @ 70 Ft. | 44 GPM |
| Max. Flow Rate @ 80 Ft. | 37 GPM |
| Max. Flow Rate @ 90 Ft. | 32 GPM |
| Max. Flow Rate @ Head | 55 GPM @ 40 ft. |
| Max. Head | 108 ft. |
| Max. Liquid Temp. | 212°F |
| Max. Operating Pressure | 125 psi |
| Max. Solid Dia. | 1/16" |
| Media Type | Water |
| Min. Flow Rate | 37 GPM |
| Min. Flow Rate @ Head | 10 GPM @ 106 ft. |
| Motor Enclosure Design | Open Dripproof |
| Mounting Orientation | Horizontal, Vertical |
| Phase | 1 |
| Port Rotation | 45 Deg. Increments |
| Rpm | 3500 RPM |
| Seal Application | Water |
| Seal Material | Buna Elastomer, Carbon Ceramic, Stainless Steel |
| Seal Type | Type 6 |
| Self Priming | Manual |
| Series | 3642 Series |
| Service Factor | 1.4 |
| Shaft Material | Stainless Steel |
| Shut Off Pressure | 125 psi |
| Specific Gravity | 1 |
| Type | Close Coupled |
| Voltage | 115/230V AC |
| Volute Material | Cast Iron |
| Wetted Material | Bronze, Buna N, Carbon Ceramic, Stainless Steel |
| Width | 6 5/7" |
| Compatible With Media Type | Water |
| Connection Type | NPT |
| Discharge Type | NPT |
| Flow Rate (maximum) | 55 GPM |
| Flow Rate (minimum) | 37 GPM |
| Frequency | 60 Hz |
| Horsepower | 1 hp |
| Maximum Feet Of Head | 108 ft. |
| Maximum Flow Rate @ 100 Feet Of Head | 23 GPM |
| Maximum Flow Rate @ 30 Feet Of Head | 57 GPM |
| Maximum Flow Rate @ 40 Feet Of Head | 55 GPM |
| Maximum Flow Rate @ 50 Feet Of Head | 52 GPM |
| Maximum Flow Rate @ 60 Feet Of Head | 49 GPM |
| Maximum Flow Rate @ 70 Feet Of Head | 44 GPM |
| Maximum Flow Rate @ 80 Feet Of Head | 37 GPM |
| Maximum Flow Rate @ 90 Feet Of Head | 32 GPM |
| Motor Enclosure | Open Dripproof |
| Nameplate Voltage | 115/230V AC |
| Overall Height | 8 1/5" |
| Overall Length | 17.3" |
| Overall Width | 6.7" |
| Priming | Manual |
| Pump Housing Material | Cast Iron |
| Rpm (maximum) | 3500 RPM |
| Solid Diameter (maximum) | 0.06" |
| Specific Gravity (maximum) | 1 xg |
