| Item | Centrifugal Pump |
| Best Efficiency Flow | 74.2 GPM |
| Best Efficiency Head | 66 ft. |
| Compatible Discharge Pipe Size | 1 1/4" |
| Compatible Intake Pipe Size | 1 1/2" |
| Connection Type | NPT |
| Duty Cycle | Continuous |
| For Use With Potable Systems | Yes |
| Frequency | 60 Hz |
| Height | 10.7" |
| Housing Material | Stainless Steel |
| Hp | 2 hp |
| Impeller Material | Stainless Steel |
| Length | 12.9" |
| Max. Flow Rate | 82.3 GPM |
| Max. Flow Rate @ 50 Ft. | 96 GPM |
| Max. Flow Rate @ 60 Ft. | 84 GPM |
| Max. Flow Rate @ 70 Ft. | 68 GPM |
| Max. Flow Rate @ 80 Ft. | 40 GPM |
| Max. Head | 84 ft. |
| Media Type | Water |
| Min. Flow Rate | 45.9 GPM |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Mounting Orientation | Horizontal |
| Outlet Type | NPT |
| Phase | 3 |
| Rpm | 3500 RPM |
| Seal Material | Buna Elastomer, Carbon Ceramic, Stainless Steel |
| Self Priming | Manual |
| Series | MCC Series |
| Shaft Material | Stainless Steel |
| Shut Off Pressure | 75 psi |
| Specific Gravity | 1 |
| Voltage | 208-230/460V AC |
| Wetted Material | Buna Elastomers, Carbon, Ceramic Stationary, Stainless Steel |
| Width | 6.7" |
| Compatible With Media Type | Water |
| Discharge Type | NPT |
| Flow Rate (maximum) | 82.3 GPM |
| Flow Rate (minimum) | 45.9 GPM |
| Horsepower | 2 hp |
| Maximum Feet Of Head | 84 ft. |
| Maximum Flow Rate @ 50 Feet Of Head | 96 GPM |
| Maximum Flow Rate @ 60 Feet Of Head | 84 GPM |
| Maximum Flow Rate @ 70 Feet Of Head | 68 GPM |
| Maximum Flow Rate @ 80 Feet Of Head | 40 GPM |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Nameplate Voltage | 208-230/460V AC |
| Overall Height | 10.7" |
| Overall Length | 12.9" |
| Overall Width | 6.7" |
| Priming | Manual |
| Pump Housing Material | Stainless Steel |
| Rpm (maximum) | 3500 RPM |
| Specific Gravity (maximum) | 1 xg |
| Standards | CSA CERTIFIED, NSF 61 CERTIFIED |
