FLINT & WALLING 137434 Deep Well Submersible Pump Motor, 1 1/2 Hp, 3450 Nameplate Rpm, 230VAC, 3 Wires
Get it by Tuesday, Jun 17
€1,001.27 /unit
Add To Cart
Request a Quote
Payment
Get it by Tuesday, Jun 17
Payment
| Item | Deep Well Submersible Pump Motor |
| Ambient Temp. | 86°F |
| Bearing Type | Sleeve |
| Body Dia. | 4" |
| Cord Length | 48" |
| Diaphragm Type | Pressure Equalizing |
| Full Load Amps | 10A |
| Height | 14" |
| Hp | 1 1/2 hp |
| Lead Length | 48" |
| Length Less Shaft | 14 1/16" |
| Motor Application | Deep Well Submersible Pump , Pump |
| Motor Bearings | Sleeve |
| Motor Enclosure Design | Totally Enclosed Non Ventilated |
| Motor Mounting Position | Vertical Shaft Up |
| Motor Shaft Design | Spline |
| Motor Shaft Rotation | Clockwise Shaft End |
| Motor Sub Application | Deep Well Submersible Pump |
| Motor Thermal Protection | Manual |
| Motor Type | Split Phase |
| Nameplate Rpm | 3450 RPM |
| No. Of Speeds | 1 |
| No. Of Wires | 3 |
| Number Of Wires | 3 |
| Overall Height | 14" |
| Overall Length | 15 9/16" |
| Overload Relay Max. Amp Setting | Not Applicable |
| Overload Relay Required | No |
| Service Factor | 1.3 |
| Shaft Material | Stainless Steel |
| Starter Required | No |
| Stator Type | Hermetically Sealed |
| Thermal Protection | Manual |
| Thrust Rating | 700 lbs. |
| Usable @ 200v | No |
| Usable @ 208v | No |
| Voltage | 230V AC |
| Hz | 60 |
| Max. Ambient Temp. | 86°F |
| Max. Sf Amps | 11.5A |
| Motor Design | Split-Phase |
| Motor Service Factor | 1.3 |
| Phase | Single |
| Standards | CSA (C22.2 NO. 100-14), NSF/ANSI 61 |
| Ship weight (kg) | 12.6 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
