Item | Magnetic Drive Pump |
Amps | 4.6A |
Application | Acids, Caustics, Di Water, Plating Solutions, Sodium Hydroxide , Acids, Caustics, Di-Water, Plating Solutions, Sodium Hydroxide |
Bearing Type | Thrust, Radial |
Bushing Material | Carbon |
Chemical Compatibility | Deionized Water |
Compatible Chemicals | Deionized Water |
Cord Length | 12 ft. |
Cord Type | 18-3 STW W/ NEMA 5-15P Plug |
Design | Centrifugal |
Discharge Pipe Size | 3/4" |
Feet Of Head (maximum) | 31 ft. |
Flow Rate @ 1 Ft. | 30 GPM |
Flow Rate @ 15 Ft Of Head (maximum) | 25 GPM |
Flow Rate @ 18 Ft Of Head (maximum) | 22 GPM |
Flow Rate @ 18 Ft. | 22 GPM |
Flow Rate @ 24 Ft Of Head (maximum) | 17 GPM |
Flow Rate @ 24 Ft. | 17 GPM |
Flow Rate @ 3 Ft Of Head (maximum) | 30 GPM |
Flow Rate @ 3 Ft. | 30 GPM |
Flow Rate @ 40 Ft Of Head (maximum) | Not Applicable |
Flow Rate @ 40 Ft. | 0 GPM |
Flow Rate @ 50 Ft Of Head (maximum) | Not Applicable |
Flow Rate @ 50 Ft. | 0 GPM |
Flow Rate @ 6 Ft Of Head (maximum) | 30 GPM |
Flow Rate @ 6 Ft. | 30 GPM |
Flow Rate @ 9 Ft Of Head (maximum) | 28 GPM |
Flow Rate @ 9 Ft. | 28 GPM |
Gasket Material | EPDM |
Height | 7 2/5" |
Horsepower (maximum) | 1/2 hp |
Housing Material | Polypropylene |
Hp | 1/2 hp |
Impeller Material | Polypropylene |
Inlet Size | 1" |
Inlet Type | FNPT |
Intake Pipe Size | 1" |
Length | 14.1" |
Max. Flow Rate @ 15 Ft. | 25 GPM |
Max. Fluid Temp. | 180°F |
Max. Head | 29 ft. , 31 ft. |
Max. Operating Pressure | 60 psi |
Max. Outlet Pressure | 12.6 psi |
Max. Viscosity | 150 cPS |
Motor Enclosure Design | Totally Enclosed Fan Cooled |
Motor Mounting Type | Horizontal |
Motor Type | Permanent Split Capacitor |
Mounting | Close Coupled |
Mounting Location | Open Air |
Mounting Orientation | Close Coupled , Horizontal |
Operating Pressure | 12.6 psi |
Operating Pressure (maximum) | 12.6 psi |
Outlet Size | 3/4" |
Outlet Type | MNPT |
Overall Height | 7 2/5" |
Overall Length | 14.1" |
Overall Width | 7 3/5" |
Phase | 1 |
Priming | Manual |
Rpm | 3450 RPM |
Self Priming | Manual |
Series | DB5.5 Series |
Specific Gravity | 1.8 |
Temp (f) @ 0 Psig | 180°F |
Temp (f) @ 10 Psig | 180°F |
Temp (f) @ 20 Psig | 180°F |
Temp (f) @ 30 Psig | 180°F |
Type | Flooded Suction |
Viscosity (maximum) | 150 cPS |
Voltage | 115V AC |
Warranty | 5 yrs. |
Width | 7 3/5" |
Discharge Pipe Type | MNPT |
Discharge Port | 3/4" MNPT |
Full Load Current | 4.6A |
Horsepower | 1/2 hp |
Intake Pipe Type | FNPT |
Manufacturers Warranty Length | 5 yrs. |
Max. Discharge Pressure | 12.6 psi |
Max. Flow Rate @ 15 Ft Of Head | 25 GPM |
Max. Flow Rate @ 18 Ft Of Head | 22 GPM |
Max. Flow Rate @ 24 Ft Of Head | 17 GPM |
Max. Flow Rate @ 3 Ft Of Head | 30 GPM |
Max. Flow Rate @ 6 Ft Of Head | 30 GPM |
Max. Flow Rate @ 9 Ft Of Head | 28 GPM |
Max. Fluid Temperature | 180°F |
Max. Ft. Of Head | 31 ft. |
Max. Specific Gravity | 1.8 |
Motor Enclosure | Totally Enclosed Fan Cooled |
Motor Speed (maximum) | 3450 RPM |
Nameplate Voltage | 115V AC |
Suction Port | 1" FNPT |