Enerpac RSM1500 low-height hydraulic cylinder is ideal for construction, manufacturing, maintenance and general lifting applications where space is limited.
Features:
- Enerpac RSM1500 hydraulic cylinder is equipped with mounting holes to permit easy fixturing for secure installation.
- It features steel construction with a baked enamel finish for corrosion resistance and structural rigidity.
- This flat jack hydraulic cylinder is equipped with a CR-400 coupler to minimise leakage and a dust cap to protect against contamination, dust & dirt.
- It has hard chrome-plated steel plungers for prolonged service life.
- This Enerpac RSM1500 hydraulic cylinder has grooved plunger ends to eliminate the need for a saddle during operation.
- It operates as a single-acting cylinder with a spring return mechanism and can be operated at pressures up to 10000 psi.
Frequently Asked Questions:
Q. How is Enerpac RSM-1500 low-height flat jack cylinder maintained?
A.
- Cleaning the cylinder at regular intervals.
- Inspecting the seals and connections for leaks.
- Lubricating the cylinder regularly.
Q. How to bleed air from Enerpac hydraulic cylinders?
A.
- Begin by attaching the cylinder and pump using the appropriate hose assembly, ensuring that all connections are securely tightened.
- If possible, position the pump at a higher level than the cylinder to aid in the smooth operation of the system.
- Before applying pressure, it is necessary to vent the pump reservoir. Additionally, advance and retract the cylinder with minimal or no pressure.
- Observe the performance of the plunger during operation. If it moves smoothly, it indicates that the air has been bled out of the system. However, if the cylinder retracts in a jerky, spongy, or pulsating manner, continue to cycle the pump and the cylinder stem until the operation becomes smooth and consistent.