Eaton GBK1420 ground bar kit is an Eaton CH load center and breaker accessory having 14 terminals for proper grounding of the load centers & circuit breakers. This ground bar having a 1-3/4 inch mounting hole distance is equipped with one 2/0 lug for connecting to the grounding wire.
Compatible Accessories:
- Eaton CH and BR Loadcenters: This Eaton GBK1420 ground bar kit is installed on Eaton CH and BR load centers for safe operations.
Frequently Asked Questions:
Q. Which wires can fit into the terminals of this Eaton GBK1420 ground bar kit?
A. This Eaton GBK1420 ground bar kit has 14 terminals with lug holes for fitting aluminium or copper wires. Small holes can fit either one 6 to 14 AWG wire or two 10 to 14 AWG wires, whereas large holes can fit one 1/0 to 14 AWG wire or three 10 to 12 AWG wires. When inserting multiple wires inside a single hole, ensure that they have the same size and material construction.
Q. How to install this Eaton GBK1420 ground bar kit?
A.
- Turn off the main power before opening the load center and installing this kit.
- Use mounting holes in the load center to install this ground bar on either its right or left side. Tighten the mounting screws.
- Fix a label marked "Equipment Ground Terminal" in the enclosure adjacent to this installed ground bar.
