Dynabrade 52431 cut-off wheel tool is ideal for cutting sheet metal, frame rails, clamps & bolts by fitting 4-inch diameter reinforced cut-off wheels (with 3/8-inch centre hole) in its 3/8"-24 spindle. This Dynabrade air tool has a handle that is offset 7 degrees for one-handed control & user comfort.
Features:
- Dynabrade 52431 cut-off wheel tool has a 0.7 hp (522W) gearless motor for low maintenance & downtime.
- It consumes 36 SCFM air at a maximum pressure of 90 PSIG (6.2 bar).
- This Dynabrade tool has a safety-lock lever for preventing accidental operation.
- It has a rear exhaust for flushing out spent lubricant or material.
Compatible Accessories:
- Dynabrade 11289 Air Filter-Regulator-Lubricator Systems: These FRL systems regulate air pressure, filter water contaminates and lubricate this pencil grinder.
- Dynabrade 95842 Air Lube: This lubricant prevents the formation of rust or sludge.
- Dynabrade 95460 Dynaswivel: This airline connector swivels 360 degrees at two locations for improving tool manoeuvrability.
- Dynabrade 96045 Motor Tune-Up Kit: This kit contains assorted parts for maintaining the unit's motor & increasing its operating life.
Standards and Approvals:
- ANSI B186.1
- ANSI B7.1
- OSHA 2206
Frequently Asked Questions:
Q. How much sound does this Dynabrade 52431 cut-off wheel tool produce?
A. Dynabrade 52431 cut-off wheel tool produces a maximum noise of 88 dB(A).
Q. What is the maximum speed of this Dynabrade 52431 cut-off wheel tool?
A. This Dynabrade pneumatic tool has a maximum speed of 20000 RPM.
Q. What size air hose is required for this Dynabrade 52431 cut-off wheel tool?
A. This Dynabrade cut-off tool has a 1/4-inch NPT connection, making it suitable for a 1/4-inch hose.
