| Item | DC Gearmotor |
| Bearing Type | Heavy Duty Ball And Thrust Balls On Case, Ball On Motor |
| Brush Type | Externally Replaceable |
| Gear Case | Die Cast Aluminum |
| Gear Case Material | Die Cast Aluminum |
| Gear Material | Hardened Steel |
| Gear Ratio | 191 , 19:1 |
| Gear Type | Helical, Spur |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Shaft Orientation | Parallel |
| Housing Material | Die Cast Aluminum |
| Input Hp | 1/2 hp |
| Keyway Depth | 3/16" |
| Keyway Width | 1/8" |
| Length Less Shaft | 14" |
| Lubrication | Permanent Heavy Fluid Gear Oil |
| Max. Ambient Temp. | 40°C |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Motor Type | DC |
| Mount Hole Center-to-center Length | 2 1/2" |
| Mount Hole Center-to-center Width | 7.13" |
| Mounting | All Position |
| Mounting Orientation | Any Angle |
| Nameplate Rpm | 90 RPM |
| Output Shaft Dia. | 3/4" |
| Output Shaft Height | 3" |
| Output Shaft Length | 1 1/2" |
| Overall Height | 6.63" |
| Overall Length | 15 1/2" |
| Overall Width | 8.13" |
| Overhung Load | 325 lbs. |
| Replaceable Motor Brushes | Yes |
| Reversible Shaft Output | No |
| Rotation | Reversible |
| Rpm Range | 76-100 RPM |
| Seals | Lip Type On Input, Output Shaft |
| Shaft Orientation | Parallel |
| Tachometer Feedback | No |
| Thermal Protection | No |
| Voltage | 90V DC |
| Base To Center Of Shaft | 3" |
| Full Load Current | 5A |
| Input Horsepower | 1/2 hp |
| Maximum Ambient Temperature | 40°C |
| Maximum Torque | 305 lbs.-in. |
| Nameplate Speed | 90 RPM |
| Operating Voltage | 90V DC |
| Output Shaft Diameter | 3/4" |
| Overhung Load Capacity | 325 lbs.-ft. |
| Seal Type | Lip Type On Input And Output Shaft |
| Standards | C-UL RECOGNIZED, UL RECOGNIZED |
