Item | Centrifugal Pump |
Ambient Temp. Max (C/F) | 140F |
Amps | 7.28-6.62/3.31 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 75 @ 60 Ft. |
Best Efficiency Range GPM @ Head | 109 @ 35 to 42 @ 70 Ft. |
Duty | Continuous |
Frame | 182TC |
GPM of Water @ 20 Ft. of Head | 122 |
GPM of Water @ 25 Ft. of Head | 118 |
GPM of Water @ 30 Ft. of Head | 114 |
GPM of Water @ 40 Ft. of Head | 104 |
GPM of Water @ 50 Ft. of Head | 90 |
GPM of Water @ 60 Ft. of Head | 75 |
GPM of Water @ 70 Ft. of Head | 42 |
Hazardous Location Class | 1 C,D / 2 E,F,G |
Height | 11.625" |
Housing Material | 316 Stainless Steel |
HP | 3 |
Hz | 60 |
Impeller Material | Stainless Steel |
Impeller Type | Closed |
Inlet | 2 NPT |
Inlet Pressure | 115 PSI |
Length | 17.75" |
Max. Case Pressure | 150 PSI |
Max. Dia. Solids | 1/8" |
Max. Fluid Viscosity | 264 CP |
Max. GPM @ Head | 122 @ 20 Ft. |
Max. Head | 78 Ft. |
Max. Liquid Temp. | 250 F |
Max. Specific Gravity | 1 |
Min. GPM @ Head | 42 @ 70 Ft. |
Motor Ambient Temp. Rating | 140 Degrees F |
Motor Enclosure | TEFC |
Motor RPM | 3450 |
NEMA/IEC Frame | 182TC |
Outlet | 1-1/2 NPT |
Phase | 3 |
Port Rotation | 90 Degrees Increments |
Screw Material | Stainless Steel |
Seal Application | Long life When not Run Dry or Pumping Abrasives |
Seal Material | Viton Elastomer/Carbon Ceramic |
Seal Type | Mechanical |
Service Factor | 1.15 |
Shaft Material | Stainless Steel |
Suction Lift | N/A |
Temp. Code | T3C |
Type | Hazardous Location Pump |
Voltage | 208-230/460 |
Volute Material | Stainless Steel |
Wetted Materials | Carbon/Ceramic, Viton, Stainless Steel |
Width | 15.125" |