Item | Centrifugal Pump |
Agency Compliance | CUS |
Amps | 7.0-6.6/3.3 |
Bearing Type | Ball |
Best Efficiency GPM @ Head | 50 @ 48 Ft. |
Best Efficiency Range GPM @ Head | 97-16 @ 23-60 Ft. |
Drain Plug | No |
Duty | Continuous |
GPM of Water @ 10 Ft. of Head | 108 |
GPM of Water @ 15 Ft. of Head | 105 |
GPM of Water @ 20 Ft. of Head | 100 |
GPM of Water @ 25 Ft. of Head | 95 |
GPM of Water @ 30 Ft. of Head | 81 |
GPM of Water @ 40 Ft. of Head | 70 |
GPM of Water @ 5 Ft. of Head | 116 |
GPM of Water @ 50 Ft. of Head | 44 |
GPM of Water @ 60 Ft. of Head | 13 |
Height | 7.875" |
Housing Material | 316 Stainless Steel |
HP | 1.5 |
Hz | 60 |
Impeller Material | Stainless Steel |
Impeller Type | Closed |
Inlet | 1-1/2" NPT |
Inlet Pressure | 122 PSI |
Inlet Type | 1-1/2" NPT |
Length | 13.437" |
Max. Case Pressure | 150 PSI |
Max. Dia. Solids | 1/8" |
Max. Fluid Viscosity | 260 SSU |
Max. GPM @ Head | 116 @ 5 Ft. |
Max. Head | 65 ft. |
Max. Liquid Temp. | 300 F |
Max. Specific Gravity | 1 |
Min. GPM @ Head | 13 @ 60 Ft. |
Motor Enclosure | TEFC |
Motor RPM | 3450 |
Motor Type | 3-Phase |
NEMA/IEC Frame | 56J |
Outlet | 1-1/4 NPT |
Phase | 3 |
Port Rotation | 90 Degrees Increments |
Screw Material | Stainless Steel |
Seal Material | Viton, Carbon/Ceramic |
Seal Type | Mechanical |
Service Factor | 1.15 |
Shaft Material | Stainless Steel |
Type | Chemical Resistant |
Voltage | 208-230/460 |
Wetted Materials | 316 Stainless Steel, Viton, Carbon, Ceramic |
Width | 9.25" |