Item | DC Gearmotor |
Bearings | Roller on Case, Ball on Motor |
Brushes | Externally Replaceable |
Enclosure | TENV |
Finish | White Epoxy |
Full Load Amps | 3.70 |
Gear Case | Die Cast Aluminum |
Gear Material | Hardened Steel Worm, Forged Bronze Output Gear |
Gear Ratio | 10:1 |
Gear Type | Worm |
Housing Material | Die Cast Aluminum |
Input HP | 1/4 |
Insulation Class | F |
Keyway Size | 3/16" Square x 1-1/8" |
Length Less Shaft | 13" |
Lubrication | Permanent Heavy Duty Gear Oil |
Max. Ambient Temp. | 40 Degrees C |
Max. Torque | 50 in.-lb. |
Motor Frame | 32 |
Motor Type | Permanent Magnet DC |
Mounting | All Position Except Shaft Up |
Nameplate RPM | 250 |
No Load RPM | 268 |
Overall Length | 14.5" |
Overhung Load | 235 lb. |
Replacement Brushes | Mfr. No. M1900010.47 Brush Assembly (2 Required Per Gearmotor) |
Reversible Shaft Output | No |
Rotation | Reversible |
RPM Range | 201 to 250 |
Seals | Lip Type, Stainless Steel with Spring |
Shaft | Single Output |
Shaft Orientation | Right Angle |
Starting Torque | 572 in.-lb. |
Thermal Protection | None |
Voltage | 90 VDC |