Item | Pump |
Amps | 0.4A |
Base Dia. | 5 14/25" |
Body Material | Cast Iron |
Compatible Discharge Pipe Size | 3/4" |
Compatible Intake Pipe Size | 3/4" |
Connection Size | 3/4" |
Cord Length | Not Applicable |
Dia. | 5 5/9" |
Dia. (in.) | 5 9/16" |
Diameter | 5 5/9" |
Discharge Port (in.) | 3/4" |
Discharge Port Size | 3/4" |
Electrical Connection Type | Hardwired |
Feet Of Head (minimum) | 1 ft. |
Flow Rate (maximum Water) | 12.5 GPM |
Flow Rate (maximum, Water) | 12.5 GPM |
Flow Rate @ 1 Ft Of Head (maximum Oil) | 12.5 GPM |
Flow Rate @ 1 Ft Of Head (maximum Water) | 12.5 GPM |
Flow Rate @ 1 Ft Of Head (maximum, Oil) | 12.5 GPM |
Flow Rate @ 1 Ft Of Head (maximum, Water) | 12.5 GPM |
Flow Rate @ 10 Ft Of Head (maximum Oil) | Not Applicable |
Flow Rate @ 10 Ft Of Head (maximum Water) | 4 GPM |
Flow Rate @ 10 Ft Of Head (maximum, Water) | 4 GPM |
Flow Rate @ 15 Ft Of Head (maximum Oil) | Not Applicable |
Flow Rate @ 15 Ft Of Head (maximum Water) | Not Applicable |
Flow Rate @ 20 Ft Of Head (maximum Oil) | Not Applicable |
Flow Rate @ 20 Ft Of Head (maximum Water) | Not Applicable |
Flow Rate @ 5 Ft Of Head (maximum Oil) | Not Applicable |
Flow Rate @ 5 Ft Of Head (maximum Water) | 9.8 GPM |
Flow Rate @ 5 Ft Of Head (maximum, Water) | 9.8 GPM |
For Media Type | Non-Flammable Liquids |
For Use With | Nonflammable Liquids Compatible With Pump Component Materials |
Gph Of Water @ 2 Ft. Of Head | 717 GPH |
Gph Of Water @ 3 Ft. Of Head | 677 GPH |
Gph Of Water @ 9 Ft. Of Head | 276 GPH |
Gpm Of Oil 500 Ssu @ 3 Ft. Of Head | 8 GPM |
Gpm Of Oil 500 Ssu @ 6 Ft. Of Head | 4.4 GPM |
Gpm Of Water @ 1 Ft. Of Head | 12.5 GPM |
Gpm Of Water @ 7 Ft. Of Head Low | 7.8 GPM |
Height | 14.06" |
Housing Material | Cast Iron |
Hp | 1/8 hp |
Immersion Depth (maximum) | 6.38" |
Impeller Material | Stainless Steel |
Inlet Size | 3/4" |
Inlet/outlet | 3/4" |
Length | 5 4/5" |
Max. Feet Of Head | 10 ft. |
Max. Flow Rate | 12.5 GPM |
Max. Flow Rate @ 10 Ft. | 4 GPM |
Max. Flow Rate @ 5 Ft. | 588 GPH |
Max. Flow Rate @ 6 Ft. | 9 GPM |
Max. Flow Rate @ 7 Ft. | 7.8 GPM |
Max. Flow Rate @ 9 Ft. | 4.6 GPM |
Max. Immersion Depth | 6 3/8" |
Max. Immersion Depth (in.) | 6 3/8" |
Max. Temp. | 200°F |
Max. Viscosity | 500 SUS |
Maximum Viscosity | 500 SUS |
Media Type | Non Flammable Liquids |
Min. Immersion Depth | 2" |
Min. Immersion Depth (in.) | 2" |
Minimum Immersion Depth | 2" |
Motor Enclosure Design | Totally Enclosed Fan Cooled |
Motor Type | Three Phase |
Nominal Tank Depth | 8" |
Nominal Tank Depth (in.) | 8" |
Outlet Size | 3/4" |
Outlet Type | NPT |
Overall Height | 14.06" |
Overall Length | 5.81" |
Overall Width | 5 1/2" |
Phase | 3 |
Pump Housing Material | Cast Iron |
Seal Material | Nitrile Rubber |
Shaft Material | Stainless Steel |
Shaft Seal Material | Buna N |
Shut Off Length | 10 ft. |
Type | Coolant |
Voltage | 230V AC |
Width | 5 1/2" |
Compatible With Media Type | Non-Flammable Liquids |
Discharge Type | NPT |
Flow Rate @ 1 Foot Of Head (maximum, Oil) | 12.5 GPM |
Flow Rate @ 1 Foot Of Head (maximum, Water) | 12.5 GPM |
Flow Rate @ 10 Feet Of Head (maximum, Water) | 4 GPM |
Flow Rate @ 5 Feet Of Head (maximum, Water) | 9.8 GPM |
Horsepower | 1/8 hp |
Immersion Depth (minimum) | 2" |
Intake And Discharge Size | 3/4" |
Intake Type | NPT |
Maximum Feet Of Head | 10 ft. |
Maximum Immersion Depth | 6.38" |
Media Temperature (maximum) | 200°F |
Motor Enclosure | Totally Enclosed Fan Cooled |
Nameplate Voltage | 230V AC |
Rpm (maximum) | 1750 RPM |