DAYTON 4JPD6 Turbine Pump 1/2 Hp 3-phase 1.7/0.9 Amp
Get it by Thursday, Jun 19
€1,089.21 /unit
Add To Cart
Request a Quote
Payment
Get it by Thursday, Jun 19
Payment
| Item | Turbine pump |
| Amps | 1.8-1.7/0.9A |
| Bearing Type | Ball |
| Best Efficiency Flow Range @ Head | 70 to 125 GPM @ 3 to 1 to ft. |
| Best Efficiency Flow Rate @ Head | 1.8 GPM @ 100 ft. |
| Best Efficiency Head | 100 ft. |
| Bracket Finish | Nickel Plated |
| Compatible Discharge Pipe Size | 3/4" |
| Compatible Intake Pipe Size | 3/4" |
| Cover Material | Cast Iron |
| Drain Plug | Easily Accessible At Bottom |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Features | Designed To Handle Liquids With Entrained Air |
| Flow Rate @ 10 Psi | 6 GPM |
| Flow Rate @ 100 Psi | 1.1 GPM |
| Flow Rate @ 120 Psi | 1.2 GPM |
| Flow Rate @ 140 Psi | Not Applicable |
| Flow Rate @ 15 Psi | Not Applicable |
| Flow Rate @ 160 Psi | Not Applicable |
| Flow Rate @ 180 Psi | Not Applicable |
| Flow Rate @ 20 Psi | 5.4 GPM |
| Flow Rate @ 200 Psi | Not Applicable |
| Flow Rate @ 220 Psi | Not Applicable |
| Flow Rate @ 240 Psi | Not Applicable |
| Flow Rate @ 260 Psi | Not Applicable |
| Flow Rate @ 30 Psi | 4.9 GPM |
| Flow Rate @ 40 Psi | 4.3 GPM |
| Flow Rate @ 50 Psi | 3.7 GPM |
| Flow Rate @ 60 Psi | 3.4 GPM |
| Flow Rate @ 70 Psi | Not Applicable |
| Flow Rate @ 75 Psi | 2.8 GPM |
| Flow Rate @ 80 Psi | 2.6 GPM |
| Flow Rate @ 90 Psi | 2.2 GPM |
| For Media Type | Water |
| Frame | 56J |
| Frequency | 60 Hz |
| Gasket Material | Buna N |
| Grade | Grade 304, Grade 316 |
| Height | 6 3/8" |
| Housing Material | Bronze |
| Hp | 1/2 hp |
| Impeller Design | Open |
| Impeller Material | Bronze |
| Impeller Type | Open |
| Inlet Pressure | 150 psi |
| Inlet Size | 3/4" |
| Length | 13 1/5" |
| Max. Case Pressure | 300 psi |
| Max. Flow Rate | 6 GPM |
| Max. Media Temp. | 230°F |
| Max. Pressure | 140 psi |
| Max. Specific Gravity | 1 |
| Media Type | Water |
| Min. Flow Rate | 1.2 GPM |
| Min. Media Temp. | -20°F |
| Motor Enclosure Design | Open Dripproof |
| Motor Frame Designation | 56J |
| Motor Type | Three Phase |
| Npshr | 150 psi |
| Operation | Manual |
| Outlet | 3/4" |
| Outlet Size | 3/4" |
| Outlet Type | NPT |
| Overall Height | 6.38" |
| Overall Width | 6 1/2" |
| Phase | 3 |
| Pump Housing Material | Bronze |
| Rpm | 3450 RPM |
| Screw Material | Stainless Steel |
| Seal Application | Long Life When Not Run Dry Or Pumping Abrasives |
| Seal Material | Buna N, Carbon Ceramic, Stainless Steel |
| Seal Type | Mechanical , Mechanical Seal |
| Seat Material | Carbon Ceramic |
| Self Priming | Yes |
| Service Factor | 1.6 |
| Shaft Material | Bronze, Stainless Steel |
| Shaft Size | 5/8" |
| Shut Off Pressure | 120 psi |
| Shut Off Pressure (maximum) | 120 psi |
| Specific Gravity | 1 |
| Specific Gravity (maximum) | 1 |
| Type | Centrifugal |
| Voltage | 208/230/460V AC |
| Volute Material | Bronze |
| Wetted Material | Bronze, Buna N, Carbon Ceramic, Stainless Steel |
| Width | 6 1/2" |
| Case Pressure (maximum) | 300 psi |
| Compatible With Media Type | Water |
| Connection Type | NPT |
| Flow Rate (maximum) | 6 GPM |
| Flow Rate (minimum) | 1.2 GPM |
| Horsepower | 1/2 hp |
| Intake And Discharge Size | 3/4" |
| Media Temperature (minimum) | -20°F |
| Motor Enclosure | Open Dripproof |
| Nameplate Voltage | 208-230/460V AC |
| Priming | Self Priming |
| Rpm (maximum) | 3450 RPM |
| Standards | UL LISTED |
| Ship weight (kg) | 15.73 |
| Ship height (cm) | 34.54 |
| Ship length (cm) | 56.39 |
| Ship width (cm) | 28.7 |
| HS code | 8413702005 |
| Country of Origin | IN |
| Product | Model | Best Efficiency GPM @ Head | Best Efficiency Range GPM @ Head | GPM | GPM @ 20 PSI | GPM @ 40 PSI | Height | Housing Material | Inlet | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
4JPF4 | 1.9 @ 75 Ft. | 60 - 100 @ 2.3 - 1.3 Ft. | 1.5 | 3.4 | 2.8 | 7.6" | Cast Iron with nickel plating | 1-1/4" | €991.25 |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.