DAYTON 12N808 Sewage/trash Pump 10 Hp
Get it by Monday, Jun 16
€4,681.16 /unit
Add To Cart
Request a Quote
Payment
Get it by Monday, Jun 16
Payment
| Item | Sewage/Trash Centrifugal Pump |
| Amps | 12.2/24.4-25.6A |
| Bearing Type | Ball |
| Best Efficiency Flow Range @ Head | 50-62 GPM @ 268-230 ft. |
| Best Efficiency Flow Rate @ Head | 250 GPM @ 55 ft. |
| Best Efficiency Head | 55 ft. |
| Compatible Discharge Pipe Size | 3" |
| Compatible Intake Pipe Size | 3" |
| Drain Plug Size | 3/4" |
| Duty | Continuous |
| Duty - Pumps | Continuous |
| Duty Cycle | Continuous |
| Feet Of Head (minimum) | 20 ft. |
| Flow Rate @ 100 Ft Of Head (maximum) | Not Applicable |
| Flow Rate @ 20 Ft Of Head (maximum) | 331 GPM |
| Flow Rate @ 20 Ft. | 331 GPM |
| Flow Rate @ 25 Ft. | 325 GPM |
| Flow Rate @ 30 Ft. | 320 GPM |
| Flow Rate @ 40 Ft Of Head (maximum) | 296 GPM |
| Flow Rate @ 40 Ft. | 296 GPM |
| Flow Rate @ 50 Ft. | 268 GPM |
| Flow Rate @ 55 Ft. | 250 GPM |
| Flow Rate @ 60 Ft Of Head (maximum) | 236 GPM |
| Flow Rate @ 60 Ft. | 236 GPM |
| Flow Rate @ 70 Ft. | 198 GPM |
| Flow Rate @ 80 Ft Of Head (maximum) | 156 GPM |
| Flow Rate @ 80 Ft. | 156 GPM |
| Flow Rate @ 90 Ft. | 104 GPM |
| Flow Rate Of Water @ 25 Ft. | 325 GPM |
| Flow Rate Of Water @ 50 Ft. | 268 GPM |
| Flow Rate Of Water @ 90 Ft. | 104 GPM |
| For Media Type | Sewage |
| Frame | 215JM |
| Frequency | 60 Hz |
| Gpm Of Water @ 20 Ft. | 331 GPM |
| Gpm Of Water @ 30 Ft. | 320 GPM |
| Gpm Of Water @ 40 Ft. | 296 GPM |
| Gpm Of Water @ 60 Ft. | 236 GPM |
| Gpm Of Water @ 70 Ft. | 198 GPM |
| Gpm Of Water @ 80 Ft. | 156 GPM |
| Height | 13.1" |
| Housing Material | Cast Iron |
| Hp | 10 hp |
| Hp - Pumps | 10 hp |
| Impeller Material | Stainless Steel |
| Impeller Type | Semi Open |
| Includes | Strainer |
| Inlet Pressure | 25 psi |
| Inlet Size | 3" |
| Length | 29 1/2" |
| Max. Case Pressure | 60 psi |
| Max. Dia. Solids - Pumps | 1 1/3" |
| Max. Feet Of Head | 109 ft. |
| Max. Flow Rate | 331 GPM |
| Max. Head | 109 ft. |
| Max. Head - Pumps | 109 ft. |
| Max. Media Temp. | 160°F |
| Max. Solid Dia. | 1 1/3" |
| Max. Specific Gravity | 1 |
| Max. Suction Lift | 20 ft. |
| Media Type | Sewage |
| Min. Flow Rate | 104 GPM |
| Min. Head | 20 ft. |
| Min. Media Temp. | 40°F |
| Motor Ambient Temp. | 104°F |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Motor Type | Three Phase |
| Nema/iec Frame | 215JM |
| Npshr | 25 psi |
| Operation | Manual |
| Outlet Size | 3" |
| Outlet Type | NPT |
| Overall Height | 13.1" |
| Overall Length | 29 1/2" |
| Overall Width | 14.1" |
| Overload Thermal Protection | No , None |
| Phase | 3 |
| Port Rotation | None |
| Port Rotation - Pumps | No |
| Pump Housing Material | Cast Iron |
| Pumping Application | Clear Or Gray Water, Irrigation, Liquid Transfer, Sewage Treatment |
| Requires Control Panel | Yes |
| Rpm | 3450 RPM |
| Screw Finish | Zinc Plated |
| Seal Material | Buna N, Carbon Ceramic , Buna N, Carbon, Ceramic |
| Seal Type | Mechanical |
| Self Priming | Yes |
| Self-priming | Yes |
| Service Factor | 1.25 |
| Shaft Material | Steel |
| Solid Diameter (maximum) | 1.3" |
| Specific Gravity | 1 |
| Specific Gravity (maximum) | 1 |
| Submersible | No |
| Voltage | 208/230/460V AC |
| Volute Material | Cast Iron |
| Wetted Material | Buna N, Carbon Ceramic, Cast Iron, Stainless Steel |
| Width | 14.1" |
| Compatible Pipe Size | 3" |
| Compatible With Media Type | Sewage |
| Connection Type | NPT |
| Discharge Type | NPT |
| Flow Rate (maximum) | 331 GPM |
| Flow Rate (minimum) | 104 GPM |
| Horsepower | 10 hp |
| Manufacturer Warranty Length | 1 yr. |
| Maximum Feet Of Head | 109 ft. |
| Maximum Flow Rate @ 20 Feet Of Head | 331 GPM |
| Maximum Flow Rate @ 40 Feet Of Head | 296 GPM |
| Maximum Flow Rate @ 60 Feet Of Head | 236 GPM |
| Maximum Flow Rate @ 80 Feet Of Head | 156 GPM |
| Maximum Solid Diameter | 1.3" |
| Maximum Suction Lift | 20 ft. |
| Media Temperature (maximum) | 160°F |
| Media Temperature (minimum) | 40°F |
| Motor Ambient Temperature (maximum) | 104°F |
| Motor Ambient Temperature (minimum) | 104°F |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Nameplate Voltage | 208-230/460V AC |
| Priming | Self Priming |
| Rpm (maximum) | 3450 RPM |
| Standards | CULUS LISTED |
| Thermal Overload Protection | No |
| Ship weight (kg) | 138.15 |
| Ship height (cm) | 33.27 |
| Ship length (cm) | 74.93 |
| Ship width (cm) | 35.81 |
| HS code | 8413702015 |
| Country of Origin | IN |
| Model | Amps | Best Efficiency GPM @ Head | Best Efficiency Range GPM @ Head | Drain Plug | Frame | GPM of Water @ 20 Ft. of Head | GPM of Water @ 25 Ft. of Head | GPM of Water @ 30 Ft. of Head | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| 12N806 | 13.4-12.6/6.3 | 93 @ 66 Ft. | 58 to 77 @ 105 to 71 Ft. | 3/4" NPT | 184JM | 148 | 144 | 139 | €3,293.68 | |
| 12N807 | 18.8-17.8/8.9 | 218 @ 39 Ft. | 32 to 49 @ 266 to 174 Ft. | 3/4" NPT | 184JM | 357 | 315 | 277 | €3,883.18 | |
| 12N809 | 34.6/17.3 | 410 @ 49 Ft. | 42 to 65 @ 480 to 330 Ft. | 3/4" NPT | 215JM | - | - | - | €5,614.83 | |
| 4YU36 | 8.3-7.6/3.8 | 55 @ 39 Ft. | 70-94 GPM @ 33-24 Ft | 3/8" NPT | 56J | 105 | 100 | 78 | €2,141.82 |
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
