| Item | Centrifugal Pump Head |
| Bearing Type | Ball |
| Best Efficiency Flow Range @ Head | 46.3 to 32 GPM @ 40 to 70 ft. |
| Best Efficiency Flow Rate | 37.6 GPM |
| Best Efficiency Head | 60 ft. |
| Best Efficiency Range Gpm @ Head | 46.3 GPM @ 40-32 GPM @ 70 ft. |
| Compatible Discharge Pipe Size | 1" |
| Compatible Intake Pipe Size | 1 1/4" |
| Compatible With Media Type | Non-Flammable Liquids |
| Drain Plug | NPT |
| Drain Plug Size | 3/8" |
| Duty Cycle | Continuous |
| Flow Rate @ 10 Ft. | 55.7 GPM |
| Flow Rate @ 20 Ft. | 53.3 GPM |
| Flow Rate @ 30 Ft. | 49.5 GPM |
| Flow Rate @ 40 Ft. | 46.3 GPM |
| Flow Rate @ 5 Ft. | 56 GPM |
| Flow Rate @ 50 Ft. | 42 GPM |
| Flow Rate @ 60 Ft. | 37.6 GPM |
| Flow Rate @ 70 Ft. | 32 GPM |
| Flow Rate @ 80 Ft. | 25.8 GPM |
| Flow Rate Of Water @ 50 Ft. | 42 GPM |
| For Use With | Clear, Non-Abrasive, Non-Flammable Liquids Compatible With Pump Components |
| For Use With Potable Systems | No |
| Gpm Of Water @ 70 Ft. | 32 GPM |
| Grade | Grade 304, Grade 316 |
| Height | 9" |
| Housing Material | Stainless Steel |
| Hp | 1 1/2 hp |
| Hp Required | 1 1/2 hp |
| Impeller Design | Closed |
| Impeller Material | Stainless Steel |
| Impeller Type | Closed |
| Inlet | 1 1/4" |
| Inlet Pressure | 106 psi |
| Inlet Size | 1 1/4" |
| Length | 11 7/8" |
| Max. Case Pressure | 150 psi |
| Max. Dia. Solids | 1/8" |
| Max. Flow Rate | 56 GPM |
| Max. Flow Rate @ 1 Ft Of Head | Not Applicable |
| Max. Flow Rate @ 15 Ft. | 54.6 GPM |
| Max. Head | 103 ft. |
| Max. Liquid Temp. | 200°F |
| Max. Pressure | 44 psi |
| Max. Solid Dia. | 0.13" |
| Max. Specific Gravity | 1 |
| Max. Suction Lift | Not Applicable |
| Media Type | Non Abrasive Liquids, Non Flammable Liquids |
| Motor Mount Type | Pedestal Mount Direct Drive |
| Outlet | 1" |
| Outlet Rotation | 90° |
| Outlet Size | 1" |
| Outlet Type | NPT |
| Overall Height | 9" |
| Overall Length | 11 22/25" |
| Overall Width | 7.94" |
| Phase | 1 |
| Priming | Manual |
| Pump Application | Chemical Processing, Circulating Heated Or Chilled Water, Liquid Transfer, Pressure Boosting |
| Pump Housing Material | Stainless Steel |
| Screw Material | Stainless Steel |
| Seal Application | Non-Flammable Liquids Compatible With Pump Components |
| Seal Material | Carbon Ceramic, Stainless Steel, Viton , Carbon, Ceramic, Stainless Steel, Viton |
| Seal Type | Mechanical |
| Self Priming | Manual |
| Shaft Material | Stainless Steel |
| Shaft Outside Dia. | 3/4" |
| Sized For Hp | 1 1/2 hp |
| Specific Gravity | 1 |
| Type | Chemical Transfer, Straight |
| Wetted Material | Carbon Ceramic, Stainless Steel, Viton |
| Width | 7 15/16" , 7.94" |
| Best Efficiency Flow | 37.6 GPM |
| Connection Type | NPT |
| Discharge Rotation | 90° |
| Discharge Type | NPT |
| Flow Rate (maximum) | 56 GPM |
| Intake And Discharge Size | 1 1/4", 1" |
| Manufacturer Warranty Length | 1 yr. |
| Maximum Feet Of Head | 103 ft. |
| Maximum Flow Rate @ 10 Feet Of Head | 55.7 GPM |
| Maximum Flow Rate @ 15 Feet Of Head | 54.6 GPM |
| Maximum Flow Rate @ 20 Feet Of Head | 53.3 GPM |
| Maximum Flow Rate @ 30 Feet Of Head | 49.5 GPM |
| Maximum Flow Rate @ 40 Feet Of Head | 46.3 GPM |
| Maximum Flow Rate @ 5 Feet Of Head | 56 GPM |
| Maximum Flow Rate @ 50 Feet Of Head | 42 GPM |
| Maximum Flow Rate @ 60 Feet Of Head | 37.6 GPM |
| Maximum Flow Rate @ 70 Feet Of Head | 32 GPM |
| Maximum Flow Rate @ 80 Feet Of Head | 25.8 GPM |
| Media Temperature (maximum) | 200°F |
| Pumping Application | Chemical Processing, Circulating Heated or Chilled Water, Liquid Transfer, Pressure Boosting |
| Shaft Outside Diameter | 3/4" |
| Sized For Horsepower | 1 1/2 hp |
| Solid Diameter (maximum) | 0.13" |
| Specific Gravity (maximum) | 1 xg |
