| Item | Circulator Pump |
| Amps | 5/2.5A |
| Best Efficiency Flow Rate @ Head | 52 GPM @ 6 ft. |
| Compatible Discharge Pipe Size | 1" |
| Connection Type | FNPT |
| Drive Type | Direct |
| Enclosure Type | Open Dripproof |
| Face To Face Dimension | 11" |
| For Pipe Size | 1" |
| For Use With | Hydronic Systems |
| For Use With Potable Systems | No |
| Grade | Grade 303 |
| Housing Material | Bronze |
| Hp | 1 1/2 hp |
| Impeller Material | Cast Bronze |
| Max. Flow Rate @ Head | 73 GPM @ 46 ft. |
| Max. Head | 70 ft. |
| Max. Media Temp. | 200°F |
| Max. Operating Pressure | 175 psi |
| Max. Temp. | 225°F |
| Mechanical Seal Material | Carbon, EPR, Silicon Carbide |
| Media Type | Water |
| Min. Flow Rate @ Head | 13 GPM @ 15 ft. |
| Min. Media Temp. | 100°F |
| Mounting Position | Horizontal/Vertical |
| Mounting Type | Inline |
| Overall Height | 17 1/4" |
| Overall Length | 12 1/2" |
| Overall Width | 7 1/2" |
| Phase | 3 |
| Pump Type | Inline Centrifugal Pump |
| Series | E-90 Series |
| Shaft Material | Stainless Steel |
| Thermal Protection | Yes |
| Voltage | 208-240/460V AC |
| Compatible Media Type | Water |
| Compatible Pipe Size | 1" |
| Horsepower | 1 1/2 hp |
| Manufacturer Warranty Length | 1 yr. |
| Maximum Feet Of Head | 70 ft. |
| Maximum Flow Rate @ 50 Feet Of Head | 69 GPM |
| Maximum Media Temperature | 200°F |
| Maximum Operating Pressure | 175 psi |
| Minimum Media Temperature | 100°F |
| Motor Enclosure Design | Open Drip Proof |
| Nameplate Voltage | 208-230V AC/460V AC |
| Phase And Brand | BELL & GOSSETT Three Phase |
| Pipe To Flange Or Union Connection Type | FNPT |
| Pump Housing Material | Cast Iron |
| Series Family | E90 |
| Standards | NEMA |
