| Item | Pump |
| Compatible Chemicals | Ammonium Hydroxide, Anhydrous Ammonia, Antifreeze (Coolant), Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Citric Acid 50%, DEF, Ethyl (Ethanol), Ethyl Acetate, Ethylene Glycol, Formic Acid, Fresh Water, Glycerin, Hydrochloric/ |
| Discharge Tube Inside Dia. | 1/2" |
| Discharge Tube Outside Dia. | 7/8" |
| For Container Type | Drum |
| For Use With | Caustic Service And Soap Solutions |
| Housing Material | Polypropylene |
| Inlet Size | 1/4" |
| Inlet Type | FNPT |
| Internal Parts Material | Polypropylene, Santoprene |
| Max. Flow Rate | 14.4 GPM |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Acetone, Ammonia (Liquids), Automatic Transmission Fluid, Biodiesel, Brake Fluid, Chromic Acid 50%, Cyclohexane, Deionized Water, Diesel Fuel, E85, Fertilizers, Formaldehyde, Formaldehyde 40%, Fu |
| Outlet Material | Vinyl |
| Outlet Type | NPT |
| Power Source | Air |
| Seal Material | Santoprene |
| Suction Tube Inside Dia. | 5/8" |
| Suction Tube Length | 38" |
| Suction Tube Outside Dia. | 1" |
| Type | Twin Diaphragm Drum |
| Air Inlet Size | 1/4" FNPT |
| Discharge Tube Outlet Id | 1/2" |
| Discharge Tube Outlet Od | 7/8" |
| For Container Size | 55 gal. |
| For Media Type | Ammonia, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Chromic Acid, Citric Acid, DEF, Ethanol, Ethyl Acetate, Ethylene Glycol, Formic Acid, Glycerin, Hydrochloric Acid, Methanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Water, Windshield Washer Fluid |
| Hose Length | 10 ft. |
| Hose Tube Material | EPDM |
| Housing Material - Pumps | Polypropylene |
| Includes | Filter/Regulator, 10 ft. EPDM Discharge Hose, Bung Adapter |
| Includes Bung Adapter | Yes |
| Includes Discharge Hose | Yes |
| Includes Nozzle | No |
| Includes Spout | No |
| Includes Suction Tube | Yes |
| Max. Viscosity | 200 cPS |
| Metered | No |
| Pump Package Type | Basic Pump With Discharge Hose |
| Ratio | 1:1 |
| Wetted Materials | Polypropylene, Santoprene |
