| Item | Pressure Plunger Pump |
| Application | High Pressure Water |
| Bearing Type | Roller |
| Bearings | Roller |
| Connecting Rod | Aluminum |
| Connecting Rod Material | Zinc Aluminum Alloy |
| Crankcase | Die Cast Aluminum |
| Crankcase Material | Die Cast Aluminum |
| Crankshaft | Forged Steel |
| Crankshaft Material | Forged Steel |
| Discharge Connection Size | 1/2" |
| Discharge Connection Type | BSP |
| Drive Type | Belt Drive |
| Driver Type | Solid Shaft |
| Electrical Connection Type | Plug In |
| Flange Type | Horizontal Plunger Pump |
| Hp Required @ 1000 Psi | 18 1/5 hp |
| Hp Required @ 1500 Psi | 27 1/5 hp |
| Hp Required @ 500 Psi | 9 1/10 hp |
| Hydraulic Motor Pressure @ 1000 Psi | Not Applicable |
| Hydraulic Motor Pressure @ 1500 Psi | Not Applicable |
| Hydraulic Motor Pressure @ 2000 Psi | Not Applicable |
| Hydraulic Motor Pressure @ 2500 Psi | Not Applicable |
| Hydraulic Motor Pressure @ 3000 Psi | Not Applicable |
| Hydraulic Motor Pressure @ 500 Psi | Not Applicable |
| Intake Connection Size | 1" |
| Intake Connection Type | BSP |
| Lubrication | Oil Bath |
| Manifold Finish | Nickel Plated |
| Manifold Material | Brass , Nickel Plated Brass |
| Max. Discharge Pressure | 1800 psi |
| Max. Flow Rate | 24 GPM |
| Max. Fluid Temp. | 140°F |
| Max. Hydraulic Motor Flow Rate | Not Applicable |
| Max. Motor Speed | 1450 RPM |
| Min. Flow Rate | 2.4 GPM |
| No. Of Pistons | 3 |
| Number Of Pistons | 3 |
| Overall Height | 7 1/2" |
| Overall Length | 16" |
| Overall Width | 13 1/2" |
| Piston Design | Triplex |
| Piston Type | Triplex |
| Plunger | Ceramic |
| Plunger Material | Ceramic |
| Pump Head Finish | Nickel Plated |
| Pump Head Material | Brass , Nickel Plated Brass |
| Required Electric Motor Hp | 27 1/5 hp |
| Required Gasoline Engine Hp | 30 hp |
| Required Max. Electric Motor Hp | 27 1/5 hp |
| Required Max. Gasoline Engine Hp | 30 hp |
| Seal Material | Buna N |
| Seal Type | Chevron, Lip |
| Shaft Outside Dia. | 30 mm |
| Shaft Type | Solid |
| Suction Port Size | 1" |
| Suction Port Type | BSP |
| Type | Pressure |
| Discharge Port | 1/2" BSP |
| Max. Fluid Temperature | 140°F |
| Operating Pressure (maximum) | 1800 psi |
| Required Electric Motor Horsepower | 27 1/5 hp |
| Required Gasoline Engine Horsepower | 30 hp |
| Shaft | 30 mm Solid |
| Shaft Outer Diameter | 30 mm |
| Suction Port | 1" BSP |
