SPEEDAIRE Air Powered Pistol Grip Drills
Filter
Air Inlet: 1/4" NPT , Duty: Industrial , Handle Material: Composite , Housing Material: Composite , Min. Hose Size: 3/8" , Required Pressure: 90 psi , Style: Pistol
Style | Model | Overall Length | Average CFM @ 15 Second Run Time | Bearings | Reversing | Tool Weight | Variable Speed | CFM @ Full Load | Chuck Size | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 45YY16 | - | - | - | - | - | - | - | - | €472.38 | |
B | 45YY30 | - | - | - | - | - | - | - | - | €588.71 | |
C | 45YY17 | - | - | - | - | - | - | - | - | €436.31 | |
D | 45YY15 | - | - | - | - | - | - | - | - | €373.25 | |
E | 45YY14 | - | - | - | - | - | - | - | - | €443.26 | |
F | 48MA04 | - | - | - | - | - | - | - | - | €98.41 | |
B | 45YY29 | - | - | - | - | - | - | - | - | €373.25 | |
G | 48MA03 | - | - | - | - | - | - | - | - | €159.82 | |
H | 10D234 | 5 4/5" | 3.37 | Needle | Yes | 1.43 lb. | No | 19.55 | 1/4" | €234.75 | |
I | 12V744 | 8.25" | 3.5 | Ball | No | 1.97 lb. | Yes | 20.0 | 1/4" | €186.40 | |
H | 10D240 | 8.25" | 3.5 | Ball | No | 2.0 lb. | Yes | 18.27 | 3/8" | €260.93 |
Air Powered Pistol Grip Drills
Speedaire air-powered pistol-grip drills are used for automotive and assembly tasks. The pistol-grip design positions the user's hand behind the bit-holding chuck to provide ergonomic handling for applying pressure and maintaining control during drilling & fastening. These lightweight drills come with a trigger to activate the drill. They operate on compressed air supply to rotate bits in hole-making and fastening applications. They are available in 3/8 & 1/4 inch chuck sizes.
We are here to help!
Looking for a part not listed here?
Explore More
- Hairnets Bouffants and Beard Nets
- Pressure Washer Spray Guns and Wands
- Pipe Insulation
- Flame Resistant and Arc Flash Coveralls
- Water Level Testers
- Gloves and Hand Protection
- Masonry
- Engine Driven Pumps
- Engines
- Voltage Regulation
- E JAMES & CO Rubber Strip, General Purpose, 30A
- KIPP 1/4-20 Thread Size Mini Wing Knob
- BANJO FITTINGS Dry-Mate Face Seal
- ZURN Mixing Cartridge, Fits Brand Zurn, Ceramic
- WOODHEAD 130226 Series Spring Assembly
- SPEARS VALVES CPVC Industrial Swing Check Valves, EPDM
- ROWE Ignition Wires
- MECHANIX TAA Fastfit Covert Tactical Gloves
- ENERPAC A Series C-Clamp Presses
- BALDOR / DODGE High Speed Taper Lock Flange Assemblies