SPEEDAIRE Air Impact Wrenches, 3/8 Inch
Filter
Air Inlet: 1/4" NPT , Anvil: Standard , Handle Type: Pistol Grip , Min. Hose Size: 3/8" , Required Pressure: 90 psi , Retainer Type: Ring , Square Drive Size: 3/8"
Style | Model | Max. Torque | Average CFM @ 15 Second Run Time | Blows per Minute | Overall Length | Style | Tool Weight | Torque Range | CFM @ Full Load | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 21AA46 | 75 ft.-lb. | 3.0 | 1000 | 5.875" | Inline | 2 lb. | 5 to 50 ft.-lb. | 12 | €285.00 | |
B | 21AA55 | 300 ft.-lb. | 4.0 | 1600 | 6" | Pistol Grip | 2.6 lb. | 25 to 250 ft.-lb. | 16 | €386.15 | |
C | 21AA47 | 400 ft.-lb. | 5.0 | 1600 | 6.25" | Pistol Grip | 3.5 lb. | 25 to 300 ft.-lb. | 20 | €480.77 |
Air Impact Wrenches, 3/8 Inch
SPEEDAIRE air impact wrenches are full-size impact wrenches with higher torque output than inline impact wrenches. They use a pressurised air supply to drive and remove industrial duty fasteners in repair, assembly and automotive applications. These impact wrenches feature pistol-grip design with bottom inlet ports for an ergonomic grip and a twin hammer style clutch for better impact than a single hammer. Choose from a wide range of 3/8 inch, air impact wrenches, available in 1000, 1200 and 1600 BPM ratings on Raptor Supplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Bar Pipe and L Clamps
- Infrared Thermometer and Imager Accessories
- Non-Illuminated Push Buttons with Contact Blocks
- Battery and Cable Connectors
- Barrier Grab Accessories
- Fastening Tool Accessories
- Paint and Wallpaper Tools
- Automotive Lubricants
- Tubeaxial Fans and Accessories
- Pavement Quality
- APPROVED VENDOR Reducing Coupling
- FLAREALERT LED Road Flare Kit
- MILLER-SMITH EQUIPMENT Flowmeter
- PANDUIT For Use With Pan-Way(R) T-45 Raceway
- ADVANTECH 12 Inch Half Height Sieve Pans, Brass Frame
- HOFFMAN Type 12 Wall Mount With Handle Disconnect Enclosures
- CDI CONTROL DEVICES Unloaders
- EAGLE GROUP Shelfs
- HUMBOLDT Snap-On Extensions, Full-flighted
- ANSELL 70-718 Hyflex Cut Resistant Gloves