RIDGID Tube Benders
RIDGID tube benders are used for bending pipes and tubes during metal-forming projects. They can be used with hardware, ropes, chains, cables & tie-downs.
Filter
Bend Radius: 16 mm , Construction: Cast Aluminum , Handle Type: Long, Non-cushioned , Type: Geared Ratchet
Working Mechanism
- RIDGID tube benders have an adjustment dial that needs to be set based on the size of the tube.
- When making more than one bend on a single tube, mark the tube with a longitudinal line as a reference point.
- Ensure that this line is always in the opposite direction of the bend direction you intend to achieve.
- Align the tube into the bender and insert it to ensure that the reference marks you made are always visible.
- Start bending by gripping the roll support arm firmly and bringing it down until the bending die indicates you've reached the desired degree mark.
- Lift the roll support arm up to remove the tube from the die. You can then take out the finished tube from the bender.
Features
- RIDGID tube benders are designed to bend steel tubes (up to 1/8 inches wall thickness), stainless steel tubes (up to 3/32 inches wall thickness) and hard copper water tubes (Types K and L).
- They produce uniform bends up to 180 degrees (no anneal tubing or use of special temper grade tubing is required).
- The high-geared design is easy to operate.
- These tools are marked with inch and metric sizes.
We are here to help!
Looking for a part not listed here?
Explore More
- PTAC and PTHP Accessories
- High Force Hydraulic Punch and Die Sets
- Wall Base
- Dilution Tanks and Traps
- Pilot Controlled Float Valves
- Distribution Equipment
- Engine Driven Pumps
- Packaging Tape Dispensers and Equipment
- Power Shears
- Hydraulic Seals
- PRECISION BRAND Arbor Shim 0.0050
- WILCOM Universal Adapters
- 3M Finishing Pad, Foam, 8 Inch Size
- DURHAM MANUFACTURING Louvered Panel Racks, Wall Mount
- VERMONT GAGE Go Standard Thread Plug Gages, 11/16-12 Un
- SALSBURY INDUSTRIES Roll-A-Bout MailBoxes
- MSA Half Mask Respirator Kits
- ASSOCIATED EQUIP Battery Chargers
- VESTIL Nestable Portable Rack Bases
- BROWNING SHS2 Series Shear Pins