OSG 11052 Series Straight Flute Tap
Filter
Finish: TiCN , List Number: 11052 , Tap Style: Bottoming , Thread Direction: Right Hand
Style | Model | Shank Dia. | Thread Length | Material | Size | Number of Flutes | Thread Type | Overall Length | Pitch | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 1105200108 | 6.50mm | 25mm | VC-10 | M6 | 3 | Metric Coarse | 80mm | 1.00mm | €46.50 | |
A | 1105200808 | 9.30mm | 42mm | VC-10 | M12 | 4 | Metric Coarse | 110mm | 1.75mm | €95.88 | |
A | 1105200708 | 9.30mm | 42mm | VC-10 | M12 | 4 | Metric Fine | 100mm | 1.50mm | €95.96 | |
A | 1105200608 | 9.30mm | 42mm | VC-10 | M12 | 4 | Metric Fine | 100mm | 1.25mm | €95.29 | |
A | 1105200508 | 9.70mm | 32mm | VC-10 | M10 | 4 | Metric Coarse | 100mm | 1.50mm | €58.20 | |
A | 1105200408 | 9.70mm | 32mm | VC-10 | M10 | 4 | Metric Fine | 100mm | 1.25mm | €64.75 | |
A | 1105201008 | 10.90mm | 42mm | VC-10 | M14 | 5 | Metric Coarse | 110mm | 2.00mm | €148.67 | |
A | 1105200908 | 10.90mm | 42mm | VC-10 | M14 | 5 | Metric Fine | 100mm | 1.50mm | €148.67 | |
A | 1105201108 | 12.00mm | 46mm | VC-10 | M16 | 5 | Metric Fine | 110mm | 1.50mm | €155.47 | |
A | 1105201208 | 12.00mm | 46mm | VC-11 | M16 | 5 | Metric Coarse | 110mm | 2.00mm | €155.01 |
11052 Series Straight Flute Tap
OSG 11052 Series taps are cutting tools used for creating internal threads on metals / plastic. They are integrated with straight flutes to run in a straight line along the tap length for efficient chip evacuation. These flute taps feature TiCN finish to resist corrosion on the exposed surfaces. They further come with eccentric thread relief for reduced friction, during cutting, to minimise heat generation and extend service life. They are available in cast iron, ductile iron and cast aluminium variants.
We are here to help!
Looking for a part not listed here?
Explore More
- Energy Recovery Ventilators
- Flashlight Holsters and Cases
- Spray Hoses
- Stainless Steel Expanded Sheets
- Metal Assortments
- Document Covers Displays and Frames
- Electrical Tools
- Shovels Tampers and Digging Tools
- Auto Body Tools
- Concrete and Asphalt
- JARKE Cantilever Rack Double Upright
- FINISH 1ST Sandpaper Sheet Rolls
- GEORG FISCHER Vent Valve Pvc/epdm
- MAIN FILTER INC. Interchange Hydraulic Pressure Line Filters, Wire Mesh, 50 Micron, Viton Seal
- BANJO FITTINGS Seals
- MARATHON MOTORS Hazardous Duty Motors, Division 1 Explosion Proof, Severe Duty, Three Phase, C Face Footless
- EATON Pushbutton Levers
- SECURALL PRODUCTS AG200 Series Chemical Storage Lockers
- MORSE DRUM Hydraulic Fittings
- BALDOR / DODGE Tigear-2 Standard Reducer With Separate Input,Size 30