MILLER ELECTRIC MIG Welders
Miller Electric MIG welders are designed to weld aluminium / steel and are ideal for fabrication, manufacturing, maintenance and repair applications. Their adaptability, coupled with minimal spatter and post-weld cleanup, makes them indispensable tools in the metalworking industry.
Style | Model | Duty Cycle | Input Voltage | Overall Depth | Overall Height | Overall Width | Wire Size | Price | |
---|---|---|---|---|---|---|---|---|---|
A | 907785001 | - | - | - | - | - | - | €11,609.42 | |
B | 951766 | - | - | - | - | - | - | €7,367.38 | |
C | 907734 | - | - | - | - | - | - | €6,591.30 | |
D | 951960 | - | - | - | - | - | - | €10,474.76 | |
E | 951792 | - | - | - | - | - | - | €16,539.26 | |
F | 951814 | - | - | - | - | - | - | €19,321.47 | |
G | 951808001 | - | - | - | - | - | - | €20,949.46 | |
H | 907786 | - | - | - | - | - | - | €11,086.65 | |
A | 907786001 | - | - | - | - | - | - | €11,442.02 | |
H | 907785 | - | - | - | - | - | - | €11,265.46 | |
I | 907747001 | - | - | - | - | - | - | €8,656.32 | |
J | 951961 | - | - | - | - | - | - | €10,617.69 | |
K | 907780 | - | - | - | - | - | - | €4,890.55 | |
L | 951819 | - | - | - | - | - | - | €24,358.27 | |
G | 951824 | - | - | - | - | - | - | €20,727.51 | |
M | 907747 | - | - | - | - | - | - | €8,020.07 | |
N | 951601 | 20% | 120 VAC | 11.25" | 12.5" | 20.5" | 0.023" to 0.035", Flux 0.030" to 0.035" | €2,265.20 | |
O | 907612 | 20% | 120 VAC | 11.25" | 12.5" | 20.5" | 0.023" to 0.035", Flux 0.030" to 0.035" | €1,800.37 | |
P | 907614 | 40% | 120/240 VAC | 20.5" | 12.5" | 20.5" | 0.023" to 0.035", Flux 0.030" to 0.045" | €3,263.41 | |
Q | 951603 | 40% | 120/240 VAC | 11.25" | 12.5" | 20.5" | 0.023" to 0.035", Flux 0.030" to 0.045" | €3,714.55 | |
R | 500536 | 60% | 230 VAC | 36.5" | 31.5" | 18.875" | 0.023" to 0.045" | €3,724.14 | |
S | 907405 | 60% | 208/230 VAC | 40" | 30" | 19" | 0.023" to 0.035", Flux 0.030" to 0.045" | - | RFQ
|
T | 907321 | 60% | 200 (208)/230 VAC | 40" | 30" | 19" | 0.023" to 0.045"/Flux 0.030 to 0.045" | €7,279.64 | |
U | 951066 | 60%/40% | 200 (208)/230 VAC | 40" | 30" | 19" | 0.023" to 0.045"/Flux 0.030 to 0.045" | - | RFQ
|
U | 951065 | 60%/40% | 230/460/575 VAC | 40" | 30" | 19" | 0.023" to 0.045"/Flux 0.030 to 0.045" | - | RFQ
|
T | 907322 | 60%/40% | 230/460/575 VAC | 40" | 30" | 19" | 0.023" to 0.035", Flux 0.030" to 0.045" | €7,361.90 |
MIG Welders
Single or three phase power MIG welders from Miller Electric are designed to weld aluminium / steel and are ideal for fabrication, manufacturing, maintenance and repair applications. These welders feature a torque feed push-pull motor to provide accurate & positive wire feed speed and electronic wire spool brake to offer optimum wire feed delivery. They are equipped with an auto gun detect system to offer quick & easy operation by simply pulling the trigger. Some models feature a large digital front panel with a built-in standard run-in, pre / post flow, burnback, spot / delay timer menu to allow operator to preset voltage and wire feed speed. Miller MIG welders come with a synergic one-knob control that allows an operator to set the wire feed speed control on the gun for easier set-up and reduced training time. Choose from a wide range of MIG welders, available with argon mix regulator / flow gauge and hose on Raptor Supplies.
Working Mechanism
- MIG welders work on the same mechanism as TIG or arc welding.
- They work on the fundamental principle of heat generation due to the electric arc.
- This heat is further employed to melt base plate metal and consumable electrodes, making a robust joint.
- The protected gases are also supplied through the nozzle that secures the weld zone from other reactive gases. It provides fine surface finish and a powerful joint.
Features
- These welders feature a torque feed push-pull motor to provide accurate & positive wire feed speed and electronic wire spool brake to offer optimum wire feed delivery.
- They have an auto gun detection system to offer quick & easy operation by simply pulling the trigger.
- These Miller MIG welders come with a synergic one-knob control that allows an operator to set the wire feed speed control on the gun for easier set-up and reduced training time.
- They provide overload protection to safeguard them from overheating or electrical issues, extending their lifespan.
- Selected models feature a large digital front panel with a built-in standard run-in, pre / post flow, burnback, spot / delay timer menu to allow operator to preset voltage and wire feed speed.
Frequently Asked Questions
What safety precautions should I follow when using a MIG welder?
- Wear appropriate personal protective equipment (PPE), including a welding helmet, gloves and flame-resistant clothing.
- Ensure proper ventilation in your workspace to prevent fumes and gases buildup.
- Always disconnect power and turn off the welder when not in use.
What factors should I consider before choosing a Miller electric MIG welder?
- Determine your welding needs (material type, thickness and application).
- Consider the available power source and amperage range.
- Budget for additional accessories like gas cylinders and safety gear.
How should I maintain the welder for optimal performance?
- Check for loose or damaged cables and connections.
- Replace worn contact tips and drive rolls as needed.
- Keep the wire feed mechanism lubricated according to the manual.
We are here to help!
Looking for a part not listed here?
Explore More
- Hex Shank Drill Bit Sets
- Shop Towels
- Strip Doors
- Hydronic Manometers
- Ceiling Fans
- Clamps
- Screws
- Fall Protection
- Check Valves and Backflow Preventers
- Gas Heaters and Accessories
- DEWALT Hammer Drill Core Bit
- AME INTERNATIONAL Lock Out Tag Out Kits
- COOPER B-LINE Type 12 Flange/Wall Mount Disconnect Enclosures
- AIRMASTER FAN Heavy Duty Safety Yellow Air Circulators 115V
- LEESON White Duck Washguard Motors, Three Phase, TENV And TEFC, C Face With Base
- APOLLO VALVES 72-100 Series Carbon Steel High Pressure Ball Valves
- COAXSHER Vector Wildland Fire Pants
- MORSE CUTTING TOOLS Center and Spot Solid Drill Bits, 1495 Series
- MORSE DRUM Ratchet Plates