MICRO 100 GLR Series, End Mill
Filter
A
BCutting Direction: Right Hand , Cutting Type: Center , Dimension Type: Fractional Inch , End: Single , End Style: Square , Grade: C2 Micro Grain , Helix Angle: 30 Degrees , List Number: GLR , Material: Carbide , Type: Roughing/Finishing
| Style | Model | Shank Dia. | Diameter | Finish | Length of Cut | Neck Dia. | Neck Length | Number of Flutes | Overall Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | GLR-500-4X | 1/2" | 1/2" | AlTiN Coated | 1" | 0.48" | 4.5" | 4 | 6" | €170.57 | |
| B | GLR-375-2 | 3/8" | 3/8" | Uncoated | 3/4" | 0.355" | 2.75" | 2 | 4" | €79.20 | |
| B | GLR-187-2 | 3/16" | 3/16" | Uncoated | 3/8" | 0.167" | 2" | 2 | 3" | €57.88 | |
| A | GLR-187-4 | 3/16" | 3/16" | Uncoated | 3/8" | 0.167" | 2" | 4 | 3" | €53.90 | |
| B | GLR-187-2X | 3/16" | 3/16" | AlTiN Coated | 3/8" | 0.167" | 2" | 2 | 3" | €56.57 | |
| A | GLR-187-4X | 3/16" | 3/16" | AlTiN Coated | 3/8" | 0.167" | 2" | 4 | 3" | €60.20 | |
| A | GLR-312-4X | 5/16" | 5/16" | AlTiN Coated | 5/8" | 0.292" | 2.625" | 4 | 4" | €90.44 | |
| A | GLR-437-4X | 7/16" | 7/16" | AlTiN Coated | 1" | 0.417" | 4.5" | 4 | 6" | €157.40 |
We are here to help!
Looking for a part not listed here?
Explore More
- Rotary Cutters
- Edge and Corner Protectors
- Rotary and Straight Line Laser Levels
- Pneumatic Casters
- Unit Heater Motors
- Welding Helmets and Welding Protection
- Emergency Preparedness
- Drums
- Indoor HID Fixtures
- Water Treatment
- YOUNG BROS. STAMP WORKS Specialty Locksmith Stamps
- JACOBS CHUCK Keyless Drill Chuck, Light Duty
- APPROVED VENDOR Shim Roll, 302 Full Hard
- LITTLE GIANT PUMPS Cast Iron Impellers
- HOFFMAN Feed Through Wireway Tee Fittings
- WATTS LFB6800 Series Full Port Ball Valves
- LEESON Extreme Duck Washguard Motors, Three Phase, Totally Enclosed, C Face With Base
- OIL SAFE Color-Coded Steel Tube Grease Guns, Lever
- EATON XT IEC Series Electronic Motor Starters, 600V
- WEG Electric Motors, 175Hp