EBERBACH Heavy Duty Blenders
Filter
Amps: 7.8 , HP: 1.5 , Length: 20.5" , Phase: Single
Style | Model | Voltage | Hz | Speed | Height | Width | Price | |
---|---|---|---|---|---|---|---|---|
A | E8013.00 | 115V | 50/60 | 1080 To 10800 RPM | - | - | €5,775.00 | RFQ
|
A | E8013.25 | 230V | 50/60 | 1080 To 10800 RPM | 18" | 16" | €11,872.75 | RFQ
|
B | E8015.25 | 230V | 60 | 10800 RPM | 21" | 10.5" | €5,313.00 | RFQ
|
B | E8015.26 | 230V | 60 | - | - | - | €5,313.00 | RFQ
|
B | E8010.25 | 230V | 60 | 10800 RPM | 21" | 10.5" | €5,313.00 | RFQ
|
Heavy Duty Blenders
Eberbach heavy-duty blenders are designed to handle oily, moisture-prone, dirty or corrosive atmospheres. They deliver mixing speeds up to 10800 rpm and are compatible with 1- or 4-litre containers. Selected models come equipped with a 1.5 hp TEFC capacitor-start motor with an automatic reset thermal protection facility to prevent motor overloading.
We are here to help!
Looking for a part not listed here?
Explore More
- Keyed Alike Padlocks
- Backflow Preventers
- Step Drill Bits
- Wire Mesh Cloths
- Pilot Controlled Float Valves
- Abrasive Accessories
- Plastics
- Tubeaxial Fans and Accessories
- Hazardous Location Fixtures
- Buriable Gas
- APPROVED VENDOR Hinge Pin Stop
- NIBCO Fitting Reducer
- SQUARE D Terminal Block End Barriers
- JOHNSON CONTROLS Lube Oil Pressure Control
- ANDERSON METALS CORP. PRODUCTS Nut, Low Lead, Brass
- B & P MANUFACTURING Snack Truck Skids
- KELCH Collet Chuck, Projection 60 mm
- ORALITE Reflective Tape, 4 Inch X 18 Inch
- BURNDY GCA Series Ground Clamp
- ANVIL Grooved Check Valves