EATON W Type Motor Control Centers


Eaton W-type motor control centres can regulate speed, change, start and stop the rotation of electric motors. They are ideal for automotive, chemical, food & beverage, construction, mining, oil & gas, pulp & paper industries.

Filter
StyleModelPrice
A
FTF2GK12
€11,925.14
RFQ
A
FTF2LM12
€15,591.01
RFQ
A
FTF2EK12
€10,752.48
RFQ
A
FTF2JJ12
€11,925.14
RFQ
A
FTF2GF12
€10,752.48
RFQ
A
FTF2HG12
€11,925.14
RFQ
A
FTF2HL12
€11,925.14
RFQ
A
FTF2JB12
€10,752.48
RFQ
A
FTF2JG12
€11,925.14
RFQ
A
FTF2KB12
€10,752.48
RFQ
A
FTF2LB12
€10,752.48
RFQ
A
FTF2MF12
€15,591.01
RFQ
A
FTF2EM12
€15,591.01
RFQ
A
FTF2NH12
€15,591.01
RFQ
A
FTK1S24
€25,771.54
RFQ
A
FTF1B12
€5,887.48
RFQ
A
FTF2AJ12
€10,752.48
RFQ
A
FTF2BA12
€9,586.50
RFQ
A
FTF2AN12
€15,591.01
RFQ
A
FTF2CC12
€9,586.50
RFQ
A
FTF2DB12
€9,586.50
RFQ
A
FTF2DJ12
€10,752.48
RFQ
A
FTF2EJ12
€10,752.48
RFQ
A
FTF2FD12
€9,586.50
RFQ
A
FTF2CE12
€9,586.50
RFQ
A
FTF2GB12
€10,752.48
RFQ
A
FTF2FM12
€15,591.01
RFQ
A
FTF2NM12
€19,234.80
RFQ
A
FTK1N24
€25,771.54
RFQ
A
FTF1F12
€8,455.80
RFQ
A
FTF1C12
€5,887.48
RFQ
A
FTF2AA12
€9,586.50
RFQ
A
FTF2BM12
€15,591.01
RFQ
A
FTF2CK12
€10,752.48
RFQ
A
FTF2CM12
€15,591.01
RFQ
A
FTF2ED12
€9,586.50
RFQ
A
FTF2HA12
€10,752.48
RFQ
A
FTF2DH12
€10,752.48
RFQ
A
FTF2JA12
€10,752.48
RFQ
A
FTF2JK12
€11,925.14
RFQ
A
FTF2KN12
€15,591.01
RFQ
A
FTJ1M18
€12,134.96
RFQ
A
FTK1R24
€25,771.54
RFQ
A
FTF2BC12
€9,586.50
RFQ
A
FTF2BE12
€9,586.50
RFQ
A
FTF2BL12
€10,752.48
RFQ
A
FTF2CB12
€9,586.50
RFQ
A
FTF2BH12
€10,752.48
RFQ
A
FTF2GA12
€10,752.48
RFQ
A
FTF2HB12
€10,752.48
RFQ
A
FTF2LL12
€11,925.14
RFQ
A
FTF2BF12
€9,586.50
RFQ
A
FTK1Q24
€25,771.54
RFQ
A
FTF2CD12
€9,586.50
RFQ
A
FTF2EH12
€10,752.48
RFQ
A
FTF2EN12
€15,591.01
RFQ
A
FTF2FJ12
€10,752.48
RFQ
A
FTF1H12
€8,455.80
RFQ
A
FTF2JD12
€10,752.48
RFQ
A
FTF2AG12
€10,752.48
RFQ
A
FTF2KG12
€11,925.14
RFQ

Working Mechanism

  • Electrical power from the main supply enters Eaton motor control center through incoming feeders. This power typically includes three phases (L1, L2, L3), a neutral and sometimes a ground.
  • Inside the MCC, the incoming power is distributed to various motor starters and components. This MCC is designed to handle multiple motor loads simultaneously.
  • Each motor starter consists of a contactor and an overload relay. When a command is given to start a motor, the contactor closes, allowing power to flow to the motor. The overload relay monitors the motor's current to protect it from overheating.

Features

  • These motor control centres have voltage ratings up to 600VAC and operating temperatures ranging from 0 to 40 degrees C.
  • They are equipped with a moulded case and air circuit breaker mains for added safety.
  • These motor control centres come with metallic and solid-state overload relays to prevent short circuits & overloading.
  • They have modular pull-apart terminal blocks that are accessible through the vertical wire way.
  • These control centres offer a slider handle mechanism for increased operational comfort.

Standards and Approvals

  • UL 845

Frequently Asked Questions

Can these Eaton motor control centers be operated manually?

Yes, they incorporate a control logic system that can be automatically or manually operated.

What does the motor controller center consist of?

Motor control center (MCC) serves as a centralised assembly for the management of electric motors. It comprises several enclosed sections that share a common power bus. Each section houses a combination starter, composed of a motor starter, fuses or a circuit breaker, and a power disconnect switch.

What is the difference between MCC and PCC panels?

The MCC stands for motor control center panels, while PCC stands for power control center. As a general rule, panels responsible for supplying or receiving high-tension (HT) power are designated as PCC, whereas panels that provide power to low-tension (LT) motors are known as MCC.

We are here to help!

Looking for a part not listed here?