EATON Memshield Series LV System Final Distribution Boards
Eaton Memshield Series LV system final distribution boards are suitable for an electrical distribution system for dividing an electrical power feed into branch circuits while providing a circuit breaker or protective fuse for each circuit in a common enclosure. These Eaton distribution boards s...erve as an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits. Read more
Style | Model | Price | |
---|---|---|---|
A | EAMS1251N | €511.48 | RFQ
|
B | EBMMB160 | €4,786.38 | RFQ
|
B | EBMMB250 | €4,786.38 | RFQ
|
C | EAM7 | €2,044.43 | RFQ
|
B | EBMBT2503 | €575.53 | RFQ
|
Features
- These LV system final distribution boards are equipped with protection mechanisms, such as circuit breakers and fuses, ensuring the safety of connected electrical circuits and devices.
- They come with modular configurations, allowing for flexible configurations that can adapt to changing electrical load requirements.
- These Eaton distribution boards have transparent busbar systems that enable easy visual inspection and fault identification, enhancing troubleshooting and reducing downtime.
- They incorporate surge protection devices that safeguard connected equipment from voltage surges and transient electrical disturbances, preserving their longevity and functionality.
- Some models are equipped with remote monitoring options, allowing users to monitor and control the distribution board's status and performance remotely.
Frequently Asked Questions
What should be the height of the distribution board?
The main & branch distribution boards' elevation should not exceed 2 meters from the floor. Additionally, there should be a front clearance of 1 meter. It is also essential to position all lighting fixtures at a minimum height of 2.25 meters from the floor.
What are the parts of a distribution board?
To ensure peak performance, a distribution board must incorporate multiple essential components. These include bus bars, automatic protective devices, bypass equipment, and fuse links.
What is the difference between LV and MV distribution boards?
The low voltage (LV) distribution boards can handle volatges up to 1000V, whereas medium voltage (MV) distribution boards are capable of handling voltages between 1000V and 45kV.
We are here to help!
Looking for a part not listed here?
Explore More
- Outlet Strips
- Peelers Cutters and Slicers
- Finger Cots
- Stepper Motor Controllers
- Surface Tester Accessories
- Shelving and Storage Racks
- Wire Connectors
- Shovels Tampers and Digging Tools
- Door Locks and Deadbolts
- Copper
- ZURN Elbow, 90 Degrees
- DUCTMATE Connector Sleeve Fitting
- RENEWABLE LUBRICANTS Drill Oil
- COOPER B-LINE Wall Supports
- THOMAS & BETTS Tite Bite Cable Connectors
- ANVIL Adjustable Pipe Roll Stands
- WRIGHT TOOL 1/2 Inch Drive Long Length Replacement Hex Bits
- SMC VALVES Arp Series Precision Regulator
- NIBCO Female Adapters, PVC