EATON HT800 Series Flat Head Push-Pull Units
Eaton HT800 Series flat head push-pull units are non-illuminated, maintained pushbuttons used to control the flow of electricity. They are ideal for use in factories and warehouses as start / stop buttons for machinery & equipment.
Filter
Style | Model | Price | |
---|---|---|---|
A | HT8DBRD1D | €322.88 | RFQ
|
A | HT8DBRD1B | €322.88 | RFQ
|
B | HT8DBHD1B | €322.88 | RFQ
|
C | HT8DBGD1B | €322.88 | RFQ
|
C | HT8DBGD1D | €322.88 | RFQ
|
B | HT8DBHD1D | €322.88 | RFQ
|
Working Mechanism
- When these buttons are pushed or pulled, they activate a switch that closes / opens an electrical circuit.
- These maintained push-pull pushbuttons remain in the activated / deactivated position until they are pushed / pulled again.
Features
- Eaton HT800 Series flat head push-pull units have NEMA-rated watertight / oil-tight bodies to prevent dirt and moisture ingress.
- Their flat mushroom head plastic actuator provide an easy-to-press surface.
- These pushbuttons have black anodised buses to establish secure connections.
Standards and Approvals
- CE
- UL
- CSA
Frequently Asked Questions
How do I troubleshoot a pushbutton?
- Make sure that the pushbutton is properly connected to the circuit.
- Ensure that the switch inside the pushbutton is not stuck in the open or closed position.
- Make sure that moisture or dirt is not affecting the operation.
Can these pushbuttons be used with a resistor?
Yes, pushbuttons can be used with a resistor to provide additional protection.
How do I replace a pushbutton?
- To replace a pushbutton, first disconnect the power to the device or circuit.
- Remove the old pushbutton by carefully disconnecting wires or cables.
- Once the old pushbutton is removed, install the new pushbutton by attaching the wires or cables to the appropriate terminals and securing the pushbutton in place.
- Finally, restore power to the device or circuit and test the new pushbutton to make sure it is functioning properly.
We are here to help!
Looking for a part not listed here?
Explore More
- Carpet Extractors
- Warning Light and Audible Device Accessories
- Spark Resistant Blowers
- Food Waste Disposers
- Band Clamp Tools
- Face Protection
- Rubber
- Footwear and Footwear Accessories
- Check Valves and Backflow Preventers
- Security Alarms and Warnings
- HUSQVARNA Polishing Pads 100 Grit
- ASCO VALVES Valve Rebuild Kits
- AMERICRAFT MANUFACTURING Variable Pitch Pulley
- GENERAL PIPE CLEANERS Maxi-Rooter Series Drain Cleaners
- FERVI Verniere Depth Gauges
- KESON Economy Series Short Tape Measures
- TIMKEN Spindle Deep Groove Ball Bearings
- GROVE GEAR GR Series, HM-H1 Style, 830 Size, Ironman Worm Gear Reducers
- GROVE GEAR GR Series, WBMQ-D Style, 813 Size, Ironman Worm Gear Reducers