EATON Female Swivel Hose Fittings
Eaton female swivel hose fittings connect hoses and tubes to other hydraulic components in a system. The fittings are designed with a female swivel end that allows for easy connection to a male fitting.
Filter
Material: Steel , Max. Working Pressure: 500 PSI , Refrigerant Type: 134A, R12, R22, R502, MP39, MP66 and R404A
Style | Model | Dash Size | Hose Inside Dia. | Hose Outside Dia. | Price | |
---|---|---|---|---|---|---|
A | FJ3057-01-0606S | 6 | 0.31" | 0.58" | €44.39 | |
B | FJ3057-02-0608S | 8 | 0.41" | 0.7" | €61.52 | |
B | FJ3057-03-0808S | 8 | 0.41" | 0.7" | €50.48 | |
B | FJ3057-04-0810S | 10 | 0.5" | 0.78" | €56.82 | |
B | FJ3057-05-1010S | 10 | 0.5" | 0.78" | €68.66 | |
B | FJ3057-06-1012S | 12 | 0.63" | 0.98" | €115.20 |
Features
- These crimp fittings are made of carbon steel to resist impact & wear and impart durability.
- They feature Dura-Kote finish to resist moisture and prevent corrosion.
Frequently Asked Questions
How to install these hose fittings?
- Cut the hose to the appropriate length.
- Lubricate the inside of the hose and the fitting threads with hydraulic oil.
- Thread the fitting onto the hose until it is hand-tight.
- Use a wrench to tighten the fitting to the recommended torque specification.
What is the difference between a straight thread and a tapered thread on Eaton female swivel hose fittings?
A straight thread has a constant diameter and requires an O-ring or a sealing washer to create a seal between the fitting and the component. A tapered thread, on the other hand, has a decreasing diameter and creates a seal by wedging the fitting into the component.
Are there any safety precautions I need to take when using Eaton female swivel hose fittings?
- Wear appropriate personal protective equipment.
- Ensure that the hydraulic system is depressurised before disconnecting or reconnecting any fittings.
- Use a torque wrench to tighten the fittings to the recommended torque specification.
- Inspect the fittings for any leaks, cracks or other damage before and after installation.
- Avoid over-tightening or under-tightening the fittings, preventing damage or leakage.
We are here to help!
Looking for a part not listed here?
Explore More
- Planers
- Can Openers
- Tap and Die Sets
- Hydraulic PTO Pumps
- Ceiling Tiles
- Hot Water Circulating Pumps
- Pullers and Separators
- Specialty Heaters
- Drawer and Cabinet Hardware
- Flooring
- OSG High Speed Steel Straight Flute Tap, TiCN Finish
- APPROVED VENDOR Push On Hose Fitting Swivel Lock Push On Hose Barb
- CALDWELL Tea Cup Lifting Sling
- PFERD 3/8"x3/8" Coated, Aluminium Oxide, Flap Wheel With Shank
- DIXON PD Series Plugs
- MARTINS INDUSTRIES Steel Floor Jacks
- USA SEALING Rubber Sheet, Neoprene
- DESTACO 385, 385-R, 385-L Series Pull Action Latch Clamps
- EATON HNW Series Molded Case Switches, N Frame
- SECURITRON Power Supplies