EATON Female BSPP Hydraulic Hose Fittings
Eaton female BSPP hydraulic hose fittings are designed to withstand high-pressure conditions, providing a reliable solution for transferring hydraulic fluids ensuring seamless fluid transfer, enhancing system performance and minimising the risk of leaks or failures in hydraulic applications. Th...ey are ideal for construction, agriculture or manufacturing applications.Read more
Filter
Connection Type: Crimpable , Finish: Zinc, Trivalent Chromate , Fitting Material: Carbon Steel
Style | Model | Dash Size | Inside Dia. | Length | Thread Size | Thread Type | Price | |
---|---|---|---|---|---|---|---|---|
A | 1BA8FR8 | 8 | 1/2" | 2.67 | 13/16"-16 | Female ORS | €4.24 | |
B | 1BA8FJC8 | 8 | 1/2" | 2.87 | 3/4"-16 | Female JIC | €13.69 | |
C | 1BA8MR8 | 8 | 1/2" | 2.3" | 13/16"-16 | Male ORB | - | RFQ
|
D | 1BA16MP12 | 12 | 3/4" | 2.8" | 1"-11-1/2 | Male NPT | €6.71 | |
E | 1BA10FJ12 | 12 | 3/4" | 2.81 | 7/8"-14 | Female JIC | €6.23 | |
D | 1BA12MP16 | 16 | 1" | 3.02 | 3/4"-14 | Male NPT | €6.79 | |
F | 1BA16FRC16 | 16 | 1" | 4.22 | 1-7/16"-12 | Female ORS | €15.54 | |
G | 1AT20KF20 | 20 | 1.25" | 2.73 | M36-1.5 | Female Metric | €360.81 | |
A | 1AV20FR20 | 20 | 1.25" | 4.07 | 1-11/16"-12 | Female ORS | €193.90 |
Features
- Eaton female BSPP hydraulic hose fittings have a crimp design, ensuring a secure and permanent connection.
- They adhere to industry standards like SAE J1453, SAE J1926, SAE J512, SAE J514 and SAE J536, ensuring compliance and reliability in hydraulic applications.
Frequently Asked Questions
Are these products corrosion-resistant?
Eaton BSPP hydraulic fittings have DURA-KOTE plating, allowing three times the corrosion protection and improved strength on carbon steel fittings.
What is the advantage of straight angle orientation?
These straight-angle fittings can make installation easier and offer minimal stress on the hose from twisting or kinking.
How do I install these hydraulic hose fittings?
- Cut the hydraulic hose to the desired length using a hose cutter. Ensure that the end of the hose is cut cleanly and squarely.
- Slide the nut, sleeve and female JIC fitting onto the end of the hose.
- Use a crimping tool specifically designed for Parker 43 Series fittings to crimp the fitting onto the hose. Follow the crimping tool manufacturer's instructions carefully to ensure a proper crimp.
- After crimping, inspect the crimped area to ensure that the fitting is properly attached to the hose and that there are no visible signs of damage or leakage.
- Install the fitting onto the appropriate port or connector on the hydraulic system. Tighten the nut with a wrench to ensure a secure fit.
- Test the hydraulic system for proper operation and leaks. If any leaks are detected, re-inspect the fitting and hose to identify and address the cause of the leak.
We are here to help!
Looking for a part not listed here?
Explore More
- Laboratory Funnels
- Sight Plugs
- Motorised Dampers
- Wireless Wall Switches
- Dispensing Needle and Syringe Accessories
- Sinks and Fountains
- Pliers
- Rainwear
- Recycling Equipment
- Felt
- SIEMENS SHMD Series Bolt-On Molded Case Circuit Breakers
- BW TECHNOLOGIES Gas Regulators
- COOPER B-LINE B527 Series Three Hole Offset Plate Connections
- ANVIL 22-1/2 Deg. Elbows
- VOLLRATH O-Rings
- LINN GEAR Spur Gears, 12 Diametral Pitch
- VESTIL VSRB Series Vertical Steel Retention Basins With Separation Wall
- WEG Tefc Foot Mount, Rolled Steel Premium General Purpose Motors