EATON Easy800 Series Programmable Relays
Eaton easy800 Series programmable relays are compact, modular devices designed for automation and control applications.
Filter
Style | Model | Price | |
---|---|---|---|
A | EASY819-AC-RCX | €1,215.50 | RFQ
|
B | EASY821-DC-TC | €1,393.77 | RFQ
|
C | EASY820-DC-RC | €1,552.59 | RFQ
|
Working Mechanism
- These relays use a microprocessor to control and monitor the input / output of the system.
- Operator can program the relay using the included software to create a logical control system using basic logic and functions.
- The program is then stored in the relay's internal memory and executed by the microprocessor.
- The microprocessor monitors the inputs and executes the programming logic which determines the state of the outputs, like turning off a motor if a temperature sensor reaches a certain limit.
Features
- Eaton easy800 Series programmable relays use an easy NET network to handle up to 320 I/O signals.
- They include a clock for functions like time-based control, timing events or tracking elapsed time and an easyD display for enhanced operator interface.
- Their front panel programming eliminates the need to change the wiring, thus reducing downtime.
Standards and Approvals
- EN
- IEC
Frequently Asked Questions
What is the operating temperature range of these relays?
Eaton easy800 Series programmable relays can handle temperatures within the range of -35 and 55 degrees C.
How to install these relays?
- Install the PLC in a control cabinet, service distribution board or an enclosure so that the power supply and terminal connections cannot be touched accidentally during operation.
- Mount the PLC to the surface using the provided screws or other mounting hardware.
- Connect the device to a power source using the correct voltage and current ratings for the specific model.
- Connect the inputs and outputs to the PLC using the wiring diagram.
- Install the programming software on a computer, following the manufacturer's instructions.
- Use the programming software to create and upload the control logic to the PLC. Make sure to test the program and debug any issues.
- Test the PLC to ensure all inputs and outputs are working as expected.
What is the range of easy NET network systems?
Users can connect up to eight easy800 / easyD devices within a proximity of 1000 metres.
We are here to help!
Looking for a part not listed here?
Explore More
- Rubber Locking Gasket Keys
- Generator Transfer Switches- Manual
- Round Belt Connectors
- Hydraulic Pipe Bender
- Gearbelt Idlers
- Hydraulic System Components
- Power Drills
- Emergency Preparedness
- Lab Ovens Heating and Refrigeration
- Specialty Fans and Accessories
- APPROVED VENDOR Hose and Regulator Assembly
- HUBBELL WIRING DEVICE-KELLEMS Support Grips, Single Eye, Closed Mesh
- CH HANSON Reflective Safety Tapes
- WATTS Total Relief Valve Kits
- WATTS LF3003 Series Dielectric Unions
- KEY-BAK Bolt Snap Key Holder
- LINN GEAR Spur Gears, 8 Diametral Pitch
- MORSE CUTTING TOOLS HSS/Co Drill Jobbers, 1330 Series
- ENERPAC EBE Series Electric Bar Cutters
- VESTIL CYL Series Welding Cylinder Torch Carts, Pneumatic