EATON Danfoss MRV3-16 Series Directional Control Valves
Eaton Danfoss MRV3-16 Series directional control valves are ideal for controlling the flow of general-purpose hydraulic fluids complying with standards like MIL?H?5606, SAE 10 & SAE 20. They are suitable for use in harvesters, refuse haulers and other applications.
Filter
Working Mechanism
- These directional control valves block valve port 2 in one position and direct the fluid flow between valve ports 1 & 3.
- Users need to turn the operator 90 degrees to direct the flow between valve ports 1 & 2 and block port 3.
- During cross-over transitions, all of these ports get blocked.
Features
- Eaton Danfoss MRV3-16 Series directional control valves have steel construction for structural rigidity & durability.
- They feature screw-in cartridge type for easy mounting / installation.
- These direct-acting MRV3-10 Series directional control valves have Buna-N seals to prevent leakage.
- They have 3 ports with a maximum flow rate of 64 l/min (17 gpm).
- These 4-way 3-position valves can operate at temperatures ranging from -40 to 120 degrees C.
Compatible Accessories
- Eaton 889636 Seal Kit: This seal repair kit has a Viton seal that provides enhanced chemical resistance in these flow control valves.
- Eaton 889632 Seal Kit: This seal repair kit has a Buna-N seal used to replace worn-out or damaged Buna-N seals in these flow control valves.
Frequently Asked Questions
What is the pressure rating of these Eaton Danfoss MRV3-16 Series directional control valves?
These Vickers Eaton MRV3-16 Series directional control valves have a pressure rating of 210 bar (3000 psi).
What is the allowable stem torque in the valve cavity of these Eaton Danfoss MRV3-16 Series valves?
The allowable stem torque applicable in the valve cavity of these Eaton Danfoss MRV3-16 Series directional control valves is 108 to 122 Nm to prevent damage to the valve.
How to prevent contaminants in these Eaton Danfoss MRV3-16 Series directional control valves?
Users are recommended to install filtration equipment with cleanliness code 18/16/13 before the valves to prevent contaminants from entering them.
We are here to help!
Looking for a part not listed here?
Explore More
- Cutting Torches
- Shelving Accessories
- Automated Gas Detector Test Systems
- Trammels and Trammel Point Sets
- Turbidity Meters
- Prying Tools
- Hoses and Sprinkler Systems
- Storage and Transport Carts
- Electronic/Bench Testing
- Fiberglass
- NORTON ABRASIVES Fine-Grade Flap Disc
- SMC VALVES Vacuum Pad Bellows
- SIEMENS QRH Series, Bolt On Circuit Breaker
- KLEIN TOOLS Scissors Holder
- TRICO Spectrum Sample Kits
- MORSE DRUM 2-5154 Series Double Stationary Drum Rollers
- ALL GEAR Cherry Bomb Arborist Climbing Lines
- LOUISVILLE Locks
- MORSE DRUM Double Heads
- SMC VALVES Cm2 Series Round Body Cylinder