Onboard Raptor as a vendor
Email

EATON CHH Series Bolt On Circuit Breakers


Eaton CHH Series bolt-on circuit breakers are used with 1MP, 1MM and 3MM modular metering stacks. These miniature circuit breakers interrupt current flows in the event of low-level faults to protect devices from electrical damage.

Filter
EATON CHH3150H4XA
EATON CHH3125H2XB
EATON CHH3175H2XC
EATON CHH3225H2XD
StyleModelNumber Of PolesAmpsAic RatingVoltage TypeFrame TypeVoltagePrice
A
CHH3150H4X		2150A42 kAIC @ 240VACCHH240V-
RFQ
A
CHH3100H4X		3100A42 kAIC @ 240VACCHH240V€1,366.19
RFQ
B
CHH3125H2X		3125A25 kAIC @ 240VACCHH240V-
RFQ
B
CHH3150H2X		3150A25 kAIC @ 240VACCHH240V-
RFQ
C
CHH3175H2X		3175A25 kAIC @ 240VACCHH240V-
RFQ
C
CHH3175H4X		3175A42 kAIC @ 240VACCHH240V-
RFQ
B
CHH3200H2X		3200A25 kAIC @ 240VACCHH240V-
RFQ
D
CHH3225H2X		3225A25 kAIC @ 240VACCHH240V-
RFQ
A
CHH3225H4X		3225A42 kAIC @ 240VACCHH240V-
RFQ

Features

  • They have a thermal-magnetic trip mechanism that allows both long-time and instantaneous functions for maximum overcurrent protection.
  • They feature bolt-on mounting with line & load side lugs for easy installation.
  • They also have a one-piece silver-flashed copper bus that provides superior conductivity, corrosion resistance and durability.
  • They further feature an enhanced & easy-to-use interface to allow users to view and make adjustments to the trip settings.
  • These three-pole, non-interchangeable trip units offer an interrupting rating of 100kA at 120 / 240VAC.

Standards and Approvals

  • UL

Frequently Asked Questions

What is meant by the term instantaneous trip?

Instantaneous tripping indicates that no delay is deliberately introduced in the tripping action of the circuit breaker during short-circuit conditions.

What is an interrupting rating?

It is the highest current at rated voltage available at the incoming terminals of the circuit breaker. The interrupting rating of the circuit breaker must be equal to or greater than the available short-circuit current at which the circuit breaker is applied to the system.

What is the purpose of a trip indicator?

It is a type of module that mounts directly to the circuit breaker trip unit and displays whether the circuit breaker has tripped due to overload, short-circuit or a ground fault condition.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More