DAYTON Suspended Vertical Hydronic Wall & Ceiling Unit Heaters
Filter
AHz: 60 , Max. Operating PSI: 75 , Motor Enclosure: Totally Enclosed
| Style | Model | Width | Air Flow | Amps | Depth | Height | Motor HP | Phase | Voltage | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 5PV63 | 18.25" | 595 cfm | 1.2 | 18.25" | 10.75" | 1/40 | 1 | 115 | €1,411.04 | |
| A | 5PV66 | 21.25" | 989 cfm | 2.1 | 21.25" | 11.125" | 1/20 | 1 | 115 | €1,453.25 | |
| A | 5PV68 | 21.25" | 1200 cfm | 2.1 | 21.25" | 11.625" | 1/20 | 1 | 115 | €1,813.28 | |
| A | 5PV55 | 25.25" | 1790 cfm | 2.3 | 25.25" | 12.75" | 1/6 | 1 | 115 | €2,043.16 | |
| A | 5PV54 | 25.25" | 1490 cfm | 1.2 | 25.25" | 12.13" | 1/8 | 1 | 115 | €1,864.12 | |
| A | 5PV56 | 29.5" | 2220 cfm | 2.3 | 29.5" | 13.625" | 1/6 | 1 | 115 | €2,212.76 | |
| A | 5PV57 | 29.5" | 2620 cfm | 2.3 | 29.5" | 14.13" | 1/6 | 1 | 115 | €2,354.99 | |
| A | 5PV59 | 37.5" | 4180 cfm | 3.6 | 37.5" | 5.125" | 1/4 | 1 | 115 | €3,953.81 | |
| A | 5PV60 | 37.5" | 4430 cfm | 5.4 | 37.5" | 15.25" | 1/2 | 1 | 115 | €4,126.88 | |
| A | 5PV61 | 37.5" | 5210 cfm | 3.2 | 37.5" | 16.75" | 3/4 | 3 | 230/460 | €4,620.33 | |
| A | 5PV62 | 37.5" | 6140 cfm | 3.2 | 37.5" | 17.625" | 3/4 | 3 | 230/460 | €5,294.21 | |
| A | 5PV64 | 42" | 8020 cfm | 5.00 | 42" | 17.25" | 1.5 | 3 | 230/460 | €7,498.77 | |
| A | 5PV65 | 42" | 9450 cfm | 5.00 | 42" | 20.75" | 1.5 | 3 | 230/460 | €9,294.97 | |
| A | 5PV67 | 42" | 11,000 cfm | 9.8 | 42" | 24.25" | 3 | 3 | 230/460 | €10,436.48 |
Suspended Vertical Hydronic Wall & Ceiling Unit Heaters
Dayton suspended vertical hydronic heater units provide primary or supplementary heating by pushing and spreading the heated air. They are suspended from a wall or ceiling to spread the air evenly. These units store water, which is then heated by passing a current through rectangular coils and circulated with a maximum rate of 75 PSI. They feature a totally enclosed motor capable of producing a maximum power output of 3 HP. The heater units are ETL & ETLc listed and complies with OSHA standards for safe use. Choose from a wide range of unit heaters, available in single and three phase variants on Raptor Supplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Tiedown Accessories
- Glue Gun Accessories
- Security/Area Lighting Fixtures
- Eyewear Germicidal Cabinets
- Heat Stress Monitors
- Sinks and Fountains
- Power Supplies
- Food Service Cookware and Preparation
- Automotive Electrical
- Indoor Fixtures
- STRONG HOLD Bin and Drawer Cabinet
- STARRETT Combination Square Sets
- APPROVED VENDOR Electrode Holder With Arc Welder
- IGUS Sleeve Bearing 7/8 inch
- BRADY 5905 Series, Number Label
- VULCAN HART High Broiler
- QUANTUM STORAGE SYSTEMS Hang Rails
- Cementex USA Offset Screwdrivers
- OSG Cobalt End Mills
- EMPIRE Turbine Ventilators