DAYTON 1 HP Turbine Pumps
Filter
Bearing Type: Ball , Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. , Drain Plug: Easily Accessible at Bottom , Duty: Continuous , Frame: 56J , HP: 1 , Hz: 60 , Impeller Material: Bronze , Impeller Type: Open , Inlet Pressure: 132 PSI , Max. Case Pressure: 200 PSI , Max. Fluid Viscosity: 100 SSU , Max. Liquid Temp.: -20 to 230 Degrees F , Max. Pressure: 120 psi , Max. Specific Gravity: 1 , Motor Enclosure: ODP , Motor RPM: 3450 , NEMA/IEC Frame: 56J , Outlet: 1" , Seal Application: Long life When not Run Dry or Pumping Abrasives , Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring , Seal Type: Mechanical Seal , Service Factor: 1.4 , Shaft Material: 304 Stainless Steel , Type: Centrifugal , Width: 6.7"
Style | Model | Housing Material | Amps | Best Efficiency GPM @ Head | Inlet | Length | Motor Type | Phase | Screw Material | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 4JPE2 | Bronze | 14.4/7.2 | 9.4 @ 50 Ft. | 1" | 15.75" | Capacitor-Start, Induction Run | 1 | SS | €1,798.61 | |
B | 4JPF7 | Cast Iron with nickel plating | 3.7-3.2/1.6 | 8.8 @ 75 Ft. | 1-1/4" | 15.35" | 3 Phase | 3 | Zinc Plated | €1,243.94 |
1 HP Turbine Pumps
Dayton turbine pumps are engineered to manage liquids with entrained air, generating pressures without vapour locking. These pumps are suitable for use in commercial and industrial boiler feed, pressure service, water treatment and reverse osmosis filtration applications. Choose from a range of these turbine pumps, available in 1 and 3 phase variants on Raptor Saupplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Air Ratchets
- Welding Positioners
- Remote Controlled Spotlights
- Tie Hooks
- Office Furniture
- Hoses and Sprinkler Systems
- Safety Storage
- Strainers
- HVAC Test Instruments
- HUBBELL WIRING DEVICE-KELLEMS Twist-Lock Locking Receptacles, 2 / 3 Pole, 50A
- PARKER CPI-FH4BZ Series Thermocouple Connectors, CPI x MNPT
- DAYTON Gravity Vent Inch Base 1/2 Sq
- ANVIL Adjustable Side Beam Clamps
- SPEARS VALVES EverTUFF TURF Swing Joints, Socket Tee Inlet x MAT Outlet
- BALDOR MOTOR Foot Mounted Crusher Motors, Three Phase
- DAYTON Handle Grips
- GASTON MILLE Air Sratch Safety Shoe
- TIMKEN Split Cylindrical Roller Bearing Medium Series Standard Plummer Block
- JUSTRITE Mobile Safety Showers And Washes