DAYTON 1/3 HP Turbine Pumps
Filter
Bearing Type: Ball , Best Efficiency GPM @ Head: 1.0 @ 85 Ft. , Best Efficiency Range GPM @ Head: 55 - 110 @ 1.7 - 0.6 Ft. , Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. , Drain Plug: Easily Accessible at Bottom , Duty: Continuous , Frame: 56J , GPM: 0.9 , GPM @ 20 PSI: 2.6 , GPM @ 40 PSI: 2 , Height: 6.3" , Housing Material: Cast Iron with nickel plating , HP: 1/3 , Hz: 60 , Impeller Material: Bronze , Impeller Type: Open , Inlet: 3/4" , Inlet Pressure: 150 PSI , Length: 13.2" , Max. Case Pressure: 200 PSI , Max. Fluid Viscosity: 100 SSU , Max. Liquid Temp.: -20 to 230 Degrees F , Max. Pressure: 140 psi , Max. Specific Gravity: 1 , Motor Enclosure: ODP , Motor RPM: 3450 , NEMA/IEC Frame: 56J , Outlet: 3/4" , Screw Material: Zinc Plated , Seal Application: Long life When not Run Dry or Pumping Abrasives , Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring , Seal Type: Mechanical Seal , Service Factor: 1.75 , Shaft Material: 304 Stainless Steel , Volute Material: Cast Iron with Nickel Plating , Wetted Materials: Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel , Width: 6.5"
Style | Model | Amps | Motor Type | Phase | Voltage | Price | |
---|---|---|---|---|---|---|---|
A | 4JPF2 | 1.5-1.4/0.7 | 3 Phase | 3 | 208-230/460 | €895.13 | |
B | 4JPF1 | 7.5/3.8 | Capacitor-Start, Induction Run | 1 | 115/230 | €1,015.55 |
1/3 HP Turbine Pumps
Dayton turbine pumps are suitable for industrial applications like pressure service, water treatment, boiler feed, condensation return, reverse osmosis filtration and spray equipment. They are equipped with type 21 mechanical seals and a reachable drain plug with ball bearings on shaft for extended life. Choose from a range of these turbine pumps available in 0.9 and 1.2 GPM flow rates on Raptor Suppies.
We are here to help!
Looking for a part not listed here?
Explore More
- Water Connectors
- U-Shaped Fluorescent Lamps
- Axial Fans
- Alloy Steel Rod Stock
- Hazardous Location Safety and Disconnect Switches
- Workbenches and Accessories
- Plugs and Receptacles
- Concrete Mixing and Preparation
- Pumps
- Pipe and Test Plugs and Accessories
- HEAT WAGON High Pressure Gas Hose
- SMC VALVES Vacuum Pad
- AME INTERNATIONAL Locking U-Rings
- NOTRAX Uni Washable Dust Control Mattings
- PASS AND SEYMOUR Heavy Duty Duplex Receptacles
- 80/20 Economy Floor Mount Base Plates
- CELLTREAT Syringe Filters
- HUMBOLDT Compound Melting Pots
- VESTIL UNI-P Series Uni-Tilts
- GROVE GEAR EL Series, Size 852, Aluminum Worm Gear Reducers