DAYTON Air Operated Drum Pumps
Dayton air-operated drum pumps are used for distributing and transporting medium to large volumes of fluids, such as washer fluid, diesel fuel, coolant and engine oil.
Style | Model | GPM | Item | Max. Liquid Temp. | Seal Material | Wetted Materials | Price | |
---|---|---|---|---|---|---|---|---|
A | 53JU96 | - | Air Operated Drum Pump | - | - | - | €904.37 | |
B | 55EC78 | - | Air Operated Drum Pump | - | - | - | €5,377.14 | |
C | 53JU98 | - | Air Operated Drum Pump | - | - | - | €1,290.16 | |
D | 53JU97 | - | Air Operated Drum Pump | - | - | - | €2,583.60 | |
E | 55EC77 | - | Air Operated Drum Pump | - | - | - | €5,330.09 | |
F | 33NT23 | 3.70 | Stub Pump | 122 Degrees F | Nitrile, Turcite, Polyurethane | Steel, Brass, Aluminum, Nitrile Rubber, Polyurethane, Turcite | €668.93 | |
G | 33NT24 | 4.76 | Stub Pump | 140 Degrees F | Nitrile, Turcite, Polyurethane | Steel, Brass, Aluminum, Nitrile Rubber, Polyurethane, Turcite | €736.59 | |
H | 33NT22 | 10.00 | Stub Pump | 122 Degrees F | Nitrile, Nylon, Polyurethane | Steel, Brass, Aluminum, Nitrile Rubber, Polyurethane, Nylon | €643.31 |
Air Operated Drum Pumps
Dayton stub pumps are used for distributing and transporting medium to large volumes of fluids, such as washer fluid, diesel fuel, coolant and engine oil. They permit more accurate flow control than electric drum pumps and produce superior flow rates in comparison to hand drum pumps. These air-controlled transfer pumps attach to an adapter that permits the inlet shaft of the pump to be mounted through the bung hole of a drum. Choose from a range of these pneumatic drum pumps, available in 3.70, 4.76 and 10 GPM flow rate options.
Features
- They permit more accurate flow control than electric drum pumps and produce higher flow rates in comparison to hand drum pumps.
- These air-controlled transfer pumps can be attached to an adapter to permit the inlet shaft of the pump to be mounted through the bung hole of a drum.
- They feature nitrile / nylon / polyurethane / turcite seals for low wear and excellent abrasion resistance.
- These pneumatic drum pumps are available in 3.7, 4.76 and 10 GPM flow rates.
Frequently Asked Questions
What is the maximum water temperature that Dayton air-operated drum pumps can handle?
These pumps can withstand water temperatures up to 140 degrees F.
Which fluids can these pumps be used with?
These pumps should be used with medium to high viscosity oils (up to SAE 130) for dispensing up to 30 metres away.
What equipment or accessories do these air-operated drum pumps come with?
These pumps come with a nipple, check valve and bung adaptor.
We are here to help!
Looking for a part not listed here?
Explore More
- Electronic Ear Muffs and Ear Plugs
- Ground Bar Kit
- Indicating Transmitters
- Gas Water Heater Controls
- Trench Drains
- Drains
- Air Treatment
- Hydraulic Filtration
- Emergency Lighting
- Wire Management
- GRAINGER Pail Dolly
- APPROVED VENDOR Adapter Fitting Abs 3/4 Inch Outer Diameter
- ROBERTSHAW Pilot And Thermopile 90 Degree
- MILWAUKEE Self Feed Drill Bits
- ALLEGRO SAFETY Replacement Inlet/Outlet Filters
- MAIN FILTER INC. Interchange Hydraulic Return Line Filters, Stainless Steel Fiber, 10 Micron, Viton Seal
- MARATHON MOTORS Multi-Speed Motors, Two-Winding
- EATON Top-Mounted Fuse Block Kits
- VESTIL BR Series Eco-Friendly Bicycle Racks
- WINSMITH SE Encore Series, E17 Size, MDTS Single Reduction Speed Reducers