DAYTON Oil Change Pump Systems
Filter
Amps: 7.5 , Body Material: Polypropylene , Cord Length: 7.8ft. , Flow Rate: 4.0 GPM , Max. Head: 40 Ft. , Max. Pressure: 17 psi , Max. Viscosity: 3000 SSU , Temp. Range: 185 F , Voltage: 12 VDC
Oil Change Pump Systems
Dayton oil change pump systems are designed to transfer oils, lubricants, coolants and non-abrasive fluids during automotive maintenance. These pump systems are made from durable polypropylene and require minimal maintenance. They feature a 12VDC motor for pumping liquid and an automatic shut-off mechanism to immediately shut off the motor when a sudden rise in temperature is detected. Dayton oil change pump systems are equipped with a non-clog rubber impeller for uninterrupted flow and a 7.8 ft long cord for portability, in addition to a reversing switch and a suction & discharge tube.
We are here to help!
Looking for a part not listed here?
Explore More
- Air Nibblers and Shears
- Galvanized Pipe
- Non-Ventilated Roof Curbs
- HVAC Brushes
- Fume Hood Accessories
- Document Covers Displays and Frames
- Lab Filtration
- Rags and Wipes
- Structural Framing Systems
- O-Rings and O-Ring Kits
- HAYWARD BYCS Series Butterfly Valve
- MERIT Expanding Drum, Rubber Cushion
- TENNSCO Z-Line Long Span Shelving
- ACROVYN Wall Covering, Irish Cream, Acrovyn
- MERSEN FERRAZ Protistor fuses, 2000VDC
- HOFFMAN TFP4 Series Side Mount Filter Fans
- STENS Starter Switches
- LITHONIA LIGHTING LED Stairwell Fixtures
- SMC VALVES Vz3000 Series Solenoid Valve
- WEG Encoder Kits