DAYTON Nesting Merchandise Platform Trucks
Dayton nesting platform trucks are used for loading & unloading trucks with bulky materials in factories, warehouses, loading docks and stock & mail rooms.
Filter
Caster Wheel Dia.: 6" , Caster Wheel Material: Mold-On Rubber , Caster Wheel Type: (2) Rigid, (2) Swivel , Caster Wheel Width: 2" , Color: Red , Deck Height: 10.5" , Deck Type: Steel , Finish: Powder Coat , Frame Material: Steel , Gauge: 11 , Handle Type: Removable , Load Capacity: 1500 lb. , Number of Caster Wheels: 4 , Overall Height: 37.5"
Style | Model | Deck Length | Deck Width | Overall Length | Overall Width | Price | |
---|---|---|---|---|---|---|---|
A | 2TUK4 | 48" | 24" | 51.25" | 28.875" | €478.89 | |
A | 2TUK5 | 54" | 27" | 57.25" | 31.875" | €593.47 | |
A | 2TUK6 | 60" | 30" | 63.25" | 34.875" | €713.41 |
Nesting Merchandise Platform Trucks
Dayton nesting merchandise platform trucks are used in factories, warehouses, loading docks and stock & mail rooms. These trucks feature a hinged steel platform for trucks to nest & save storage space, and powder-coated finish for resistance against scratches & rust. They are integrated with mould-on rubber casters for vibration absorption & floor protection, and are available in deck lengths of 48, 54 & 60 inches.
Features
- Dayton nesting merchandise platform trucks are integrated with swivel & rigid (2 each) rubber casters for vibration absorption & floor protection.
- The wheels have caster pads that allow quick removal and installation.
- These units feature a hinged steel platform for trucks to nest & save storage space and powder-coated finish for resistance against scratches & rust.
- These trucks come with tapered & slanted decks that permit multiple trucks to be pushed together and conserve space.
Compatible Accessories
- Dayton MH2TUK404G Caster Bolts: These units come with locking pins to allow grip fit installation of unassembled trucks.
- Dayton MH2TUK406G Nylon Roller Kits: These threaded tools are used with trucks during the assembling process.
- Dayton MH2TUK405G Springs: They fit onto the brand's nesting platform trucks.
Frequently Asked Questions
How are Dayton nesting merchandise platform trucks assembled?
- Install the rigid casters on the narrow end of the platform truck and the swivel casters on the wide end.
- Place each caster into the bracket and insert a long shaft through the holes, securing it with a lock pin.
- Attach the platform to the frame by securing the two hooks on the platform to the round bar located at the narrow end of the frame.
- Lift the platform near the wide end of the frame and place the springs in the retaining holes.
- Make sure that the springs are inside the upper and lower retaining holes, then lower the platform down on the springs.
- Insert threaded ends of the handle through the holes at the bottom of the handle sockets on the frame.
- Secure these handles by installing lock nuts on the threaded ends, without overtightening.
Which parts of Dayton nesting platform trucks need inspection & maintenance?
- The tightness of bolts and nuts needs to be checked every 6 months.
- Lubricate the casters with multi-purpose lithium grease at regular intervals.
- Replace worn-out components as required.
What is the load capacity of these platform trucks?
They can handle loads up to 1500 lb.
We are here to help!
Looking for a part not listed here?
Explore More
- Parts Washer Accessories
- Impact Bit Sets
- Tubing Racks
- Tap Adapters
- Feeler Gauge Sets
- Lockout Devices
- Gas Heaters and Accessories
- Hydraulic Tools
- Solenoids
- Strainers
- CHAINFLEX Tray Cable, 14 Max Amps
- CALDWELL Adjustable Spreader Beam
- VULCAN HART Burner Pilot Support
- SPEARS VALVES PVC 125 PSI PIP Fabricated Fitting 60 Deg. Elbows, Gasket x Gasket
- SPEARS VALVES CPVC True Union Ball Valves Regular Style, Flanged Ends, FKM
- Cementex USA Phillips Tip Screw Driver Bit Sockets, 3/8 Inch Square Drive
- MARTIN SPROCKET 1610 Taper Bushings
- MAGLINER Vertical Posts
- HUBBELL WIRING DEVICE-KELLEMS Wall Plates
- WEG Suggested Maximum Capacitor Ratings For T-Frame NEMA Motors