DAYTON Single Inlet Forward Curve Blowers
Filter
Assembled/Unassembled: Unassembled , Bearing Type: Ball , CFM @ 2.500-In. SP: 1288 , Housing Finish: Gray Polyester Epoxy , Housing Material: Steel , Hz: 60 , Max. Ambient Temp.: 104 F , Max. Inlet Temp.: 180 Deg.F , Rotation: CW Viewing Drive Side , Type: With Motor , Wheel Material: Steel
Style | Model | CFM @ 1.500-In. SP | Blower RPM | CFM @ 0.000-In. SP | CFM @ 1.75-In. SP | CFM @ 2.000-In. SP | dBA @ 5 Feet | Depth | Full Load Amps | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 7AP74 | - | 1725 | 595 | - | - | 53 | 11" | 5.6/2.8 | €677.80 | |
A | 7AP75 | - | 1725 | 985 | - | - | 57 | 14" | 6.1/3.1 | €1,163.49 | |
A | 7AP87 | - | 1140 | 2060 | - | - | 61 | 17" | 2.9-3.0/1.5 | €1,286.99 | |
A | 7AP86 | - | 1725 | 1510 | - | - | 63 | 17" | 2.8-2.8/1.4 | €1,279.39 | |
A | 7AP85 | - | 1140 | 1180 | - | - | 56 | 15" | 1.5-1.5/0.75 | €1,453.45 | |
A | 7AP84 | - | 1725 | 1005 | - | - | 58 | 15" | 1.4-1.6/0.8 | €1,109.54 | |
A | 7AP83 | - | 1725 | 985 | - | - | 57 | 14" | 1.4-1.6/0.8 | €1,015.67 | |
A | 7AP81 | - | 1725 | 1005 | - | - | 58 | 15" | 1.5-1.6/0.8 | €1,079.26 | |
A | 7AP80 | - | 1725 | 985 | - | - | 57 | 14" | 1.5-1.6/0.8 | €985.39 | |
A | 7AP79 | - | 1725 | 595 | - | - | 53 | 11" | 1.2-1.3/0.65 | €823.57 | |
A | 7AP78 | - | 1725 | 1510 | - | - | 63 | 17" | 11.0/5.5 | €1,251.04 | |
A | 7AP77 | - | 1140 | 1180 | - | - | 56 | 15" | 7.8/3.6-3.9 | €1,453.08 | |
A | 7AP76 | - | 1725 | 1005 | - | - | 58 | 15" | 6.1/3.1 | €1,257.36 | |
A | 7AP88 | 1390 | 1725 | - | 1250 | 1050 | 58 | 15" | 14.0/7.0 | €1,192.98 | |
A | 7AP90 | 1390 | 1725 | - | 1250 | 1050 | 58 | 15" | 3.1-2.8/1.4 | €1,568.79 | |
A | 7AP89 | 1848 | 1725 | - | 1735 | 1610 | 63 | 17" | 17.2/8.6 | €1,429.85 | |
A | 7AP91 | 1848 | 1725 | - | 1735 | 1610 | 63 | 17" | 4.5-4.1/2.0 | €1,698.17 |
Single Inlet Forward Curve Blowers
Dayton direct drive blowers are designed for industrial or commercial air moving applications. These units feature steel construction for corrosion resistance, durability and structural rigidity. They have single or three phase motors and forward-curved steel wheels to allow high-efficiency air volume with low rotational speeds, resulting in quieter operation. These units also feature direct drive mechanism that allows maximum efficiency (as there is less power loss due to fewer moving components) with optimal speeds. They come with OSHA complint fan guards to prevent accidental hazards and are available with capacitor start motors having blower speeds of 1140 and 1725 rpm.
We are here to help!
Looking for a part not listed here?
Explore More
- Below-the-Hook Lifting Magnets
- Outdoor Trash Cans
- Fiberglass Grating
- Reduced Shank Drill Bits
- Arc Slicers
- Shut-Off Valves
- Pressure and Vacuum Measuring
- Heat Activated Shrink Wrap and Equipment
- Raceways and Accessories
- Fencing and Fencing Hardware
- APPROVED VENDOR Door Holder Hand
- APPROVED VENDOR Piston Ring Set, 3 Inch
- BEL-ART - SCIENCEWARE Spinstar Stirring Bar Ptfe
- MEGAPRO Screwdriver Replacement End Bit
- WRIGHT TOOL Impact Universal Joints
- SPEARS VALVES True Union Style Diaphragm Valve Repair Kits, O-rings And FKM Backed PTFE Diaphragm, EPDM
- ALL GEAR Ramborista Arborist Climbing Lines
- JONARD F Connector Tools
- GROVE GEAR NH Series, B-L Style, 830 Size, Ironman Narrow Housing Worm Gear Reducers
- BROWNING Steel Single Type B Minimum Bore Sprockets For No. 80 Chain