DAYTON Belt Drive Blowers, 22-1/8 Inch Wheel Diameter
Filter
Assembled/Unassembled: Unassembled , Bearing Type: Ball , Discharge Height (In.): 27.25 , Discharge Width (In.): 17.125 , Housing Finish: None , Housing Height: 39.437" , Housing Length: 35.125" , Housing Material: Galvanized Steel , Housing Width: 17.125" , Hz: 60 , Inlet Dia.: 22-5/16" , Max. Ambient Temp.: 104 F , Max. Blower RPM: 600 , Max. Inlet Temp.: 150 Deg.F , Motor Enclosure: Open Dripproof , Mounting Position: Blower Shaft Horizontal , Shaft Dia.: 1-3/16" , Type: Belt Drive, Single Inlet Forward Curve With Drive Package , Wheel Diameter: 22 1/8" , Wheel Material: Steel , Wheel Width: 10.875"
Style | Model | Motor HP | Blower RPM | CFM @ 0.125-In. SP | Motor Insulation | Motor RPM | Motor Type | Phase | Rotation | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 7HR79 | 2 | 390 | 7680 | Class B | 1725 | Capacitor-Start, Capacitor-Run | 1 | CCW Viewing Drive Side | €4,214.73 | |
A | 7HR55 | 2 | 390 | 7680 | Class F | 1735 | 3-Phase | 3 | CW Viewing Drive Side | €4,123.10 | |
A | 7HT01 | 2 | 390 | 7680 | Class F | 1735 | 3-Phase | 3 | CCW Viewing Drive Side | €4,123.10 | |
A | 7HR46 | 2 | 390 | 7680 | Class B | 1725 | Capacitor-Start, Capacitor-Run | 1 | CW Viewing Drive Side | €4,263.42 | |
A | 7HR56 | 3 | 445 | 8780 | Class F | 1750 | 3-Phase | 3 | CW Viewing Drive Side | €4,484.47 | |
A | 7HT02 | 3 | 445 | 8780 | Class F | 1750 | 3-Phase | 3 | CCW Viewing Drive Side | €4,488.91 | |
A | 7HT03 | 5 | 530 | 10,600 | Class F | 1740 | 3-Phase | 3 | CCW Viewing Drive Side | €4,472.74 | |
A | 7HR57 | 5 | 530 | 10,600 | Class F | 1740 | 3-Phase | 3 | CW Viewing Drive Side | €4,472.74 | |
A | 7HR58 | 7.5 | 600 | 12,100 | Class F | 1745 | 3-Phase | 3 | CW Viewing Drive Side | €5,070.91 | |
A | 7HT04 | 7.5 | 600 | 12,100 | Class F | 1745 | 3-Phase | 3 | CCW Viewing Drive Side | €5,070.91 |
Belt Drive Blowers, 22-1/8 Inch Wheel Diameter
Dayton belt drive, single inlet blowers are ideal for industrial or commercial air moving applications. These units feature galvanised steel construction for corrosion resistance, durability and structural rigidity. They are equipped with a single or three phase motor and a forward-curved steel wheel to allow high-efficiency air volume with low rotational speeds, thereby resulting in quieter operation. These units feature belt drive design for flexibility in speeds (as there is no contact of the motor with the moving components) and transfering power between two rotating shafts. Choose from an array of these blowers, available in motor speeds ranging from 1725 & 1750 rpm.
We are here to help!
Looking for a part not listed here?
Explore More
- Funnels
- Cleanroom Products
- Downdraft Tables
- Windscreen and Fence Privacy Screens
- Machinery Movers
- Shop Furniture
- Refrigeration
- Door Hardware
- Power Shears
- Stainless Steel
- APPROVED VENDOR UHMW Film Tape
- CS JOHNSON Hand Crimp Toggle Jaw
- GRUVLOK 7001 Series, Standard Coupling
- AIR HANDLER Filter Media Roll
- BRADY Wire Marker, Wire Sleeve
- TSUBAKI Wire 3d, Round
- SPEARS VALVES PVC MDW Drain Waste And Vent Fittings P516 Combination Wyes And 1/8 Bend With Right Side Inlet, All Hub
- SPEARS VALVES PVC White Schedule 40 Clamp-On Saddles, SR Threaded, Double Outlet, EPDM O-Ring
- VESTIL PARK-P Series Fixed Height Bollards
- BOSTON GEAR 8 Transverse Diametral Pitch Right Hand Steel Hardened Helical Gears