DAYTON Blower 15 Inch, Galvanized Steel
Filter
Assembled/Unassembled: Unassembled , Bearing Type: Ball , Discharge Height (In.): 15-13/16 , Discharge Width (In.): 12.5 , Housing Finish: None , Housing Height: 24.187" , Housing Length: 22.5" , Housing Material: Galvanized Steel , Housing Width: 12.5" , Hz: 60 , Inlet Dia.: 14-3/4" , Max. Ambient Temp.: 104 F , Max. Blower RPM: 740 , Max. Inlet Temp.: 150 Deg.F , Motor Enclosure: Open Dripproof , Mounting Position: Blower Shaft Horizontal , Shaft Dia.: 1" , Wheel Diameter: 15 1/16" , Wheel Material: Steel , Wheel Width: 9"
Style | Model | Rotation | Motor HP | Blower RPM | CFM @ 0.250-In. SP | CFM @ 0.500-In. SP | CFM @ 0.750-In. SP | CFM @ 1.000-In. SP | Full Load Amps | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 7HR93 | CCW Viewing Drive Side | 3/4 | 540 | 2780 | 1990 | - | - | 2.9-2.8/1.4 | €2,058.59 | |
A | 7HR94 | CCW Viewing Drive Side | 1 | 590 | 3330 | 2520 | 1620 | - | 3.2-2.9/1.4 | €2,377.29 | |
A | 7HR95 | CCW Viewing Drive Side | 1.5 | 665 | 3840 | 3230 | 2420 | 1820 | 4.4-4.0/2.0 | €2,367.40 | |
A | 7HR73 | CCW Viewing Drive Side | 1 | 590 | 3330 | 2520 | 1620 | - | 13.0/6.6-6.5 | €2,030.57 | |
A | 7HR96 | CCW Viewing Drive Side | 2 | 740 | 4290 | 3880 | 3230 | 2520 | 5.8-5.3/2.6 | €2,458.00 | |
A | 7HR72 | CCW Viewing Drive Side | 3/4 | 540 | 2780 | 1990 | - | - | 11.6/5.9-5.8 | €2,012.65 | |
A | 7HR75 | CCW Viewing Drive Side | 2 | 740 | 4290 | 3880 | 3230 | 2520 | 21.0/11.3-10.5 | €2,549.62 | |
A | 7HR40 | CW Viewing Drive Side | 1 | 590 | 3330 | 2520 | 1620 | - | 13.0/6.6-6.5 | €1,852.27 | |
A | 7HR39 | CW Viewing Drive Side | 3/4 | 540 | 2780 | 1990 | - | - | 11.6/5.9-5.8 | €1,834.57 | |
A | 7HR47 | CW Viewing Drive Side | 3/4 | 540 | 2780 | 1990 | - | - | 2.9-2.8/1.4 | €1,880.51 | |
A | 7HR48 | CW Viewing Drive Side | 1 | 590 | 3330 | 2520 | 1620 | - | 3.2-2.9/1.4 | €2,218.68 | |
A | 7HR42 | CW Viewing Drive Side | 2 | 740 | 4290 | 3880 | 3230 | 2520 | 21.0/11.3-10.5 | €2,371.54 | |
A | 7HR49 | CW Viewing Drive Side | 1.5 | 665 | 3840 | 3230 | 2420 | 1820 | 4.4-4.0/2.0 | €2,189.32 | |
A | 7HR50 | CW Viewing Drive Side | 2 | 740 | 4290 | 3880 | 3230 | 2520 | 5.8-5.3/2.6 | €2,279.92 |
Blower 15 Inch, Galvanized Steel
Dayton single inlet forward curve blowers are designed for air moving applications in heating, air-conditioning and ventilation systems. These units have galvanised steel housing for durability, strength & corrosion resistance and feature 15-1/16 inch, forward-curved steel wheels to allow high-efficiency air volume with low rotational speeds and vibrations. They feature single or three phase motors, having automatic reset thermal protection for rebooting itself once the motor temperature drops to normal. Choose from an array of these belt drive blowers, available in blower speeds ranging from 925 to 1350 rpm.
We are here to help!
Looking for a part not listed here?
Explore More
- Magnetic Jaw Caps
- Syringe Filters
- Regenerative Blower Inlet Filters
- Idler Sheaves
- Laboratory Penetrometers
- Shut-Off Valves
- Drains
- Finishing Supplies
- Chemical Pumps
- Safety Storage
- HUSQVARNA Diamond Saw Blade, For Use With: Floor Saws
- WESTWARD Bench Yoke Vise
- HONEYWELL Pin Plunger Actuator Sub-Miniature Snap Switch
- DEWALT Abrasive Cut-Off Wheels
- WALTER TOOLS Jobber Drill 140 Carbide
- TSUBAKI Offset Links
- LIFT PRODUCTS LPT-020-60 Series, Scissor Lift Table
- CH HANSON Interlocking Brass Stencils, Single Letter Set
- GENIE Aluminum Ladder
- BROWNING Detector Cams