DAYTON Belt Drive Double Inlet Forward Curve Blowers
Filter
Bearing Type: Ball , Housing Finish: None , Housing Material: Galvanized Steel , Max. Ambient Temp.: 104 F , Max. Inlet Temp.: 150 Deg.F , Mounting: Multipostion , Type: Double Inlet Forward Curve, Belt Drive, Less Motor , Wheel Material: Steel
Style | Model | Wheel Width | Discharge Height (In.) | Discharge Width (In.) | Housing Depth | Housing Height | Housing Width | Shaft Dia. | Wheel Diameter | Price | |
---|---|---|---|---|---|---|---|---|---|---|---|
A | 5NRC7 | 6.75" | 6-5/16 | 9.187 | 14-15/16" | 16 15/16" | 9 3/16" | 3/4" | 10 1/4" | €360.92 | |
A | 5NRC8 | 6.75" | 6-5/16 | 9.187 | 12-1/2" | 14.187" | 9 3/16" | 3/4" | 10 1/4" | €432.29 | |
A | 5NRD0 | 7.625" | 7 | 10.5 | 16-9/16" | 18 13/16" | 10 1/2" | 3/4" | 11 1/8" | €401.82 | |
A | 5NRD2 | 9 1/16" | 8.375 | 12.25 | 19-3/8" | 21 11/16" | 12 1/4" | 1" | 12 3/4" | €487.52 | |
A | 5NRC9 | 9.187" | 6-5/16 | 11-13/16 | 14-15/16" | 16 15/16" | 11 13/16" | 3/4" | 10 1/4" | €380.99 | |
A | 5NRD4 | 10 15/16" | 9-11/16 | 14-11/16 | 22-11/16" | 25.75" | 14 11/16" | 1" | 15 1/16" | €697.40 | |
A | 5NRD1 | 10.125" | 7 | 13.125 | 16-9/16" | 18 13/16" | 13 1/8" | 3/4" | 11 1/8" | €408.27 | |
A | 5NRD3 | 12 1/16" | 8.375 | 15.625 | 19-3/8" | 21 11/16" | 15 5/8" | 1" | 12 3/4" | €493.42 | |
A | 5NRD6 | 12.5" | 11.75 | 17.375 | 27" | 30 11/16" | 17 3/8" | 1" | 17 13/16" | €1,135.59 | |
A | 5NRD5 | 14.875" | 9-11/16 | 18.625 | 22-11/16" | 25.75" | 18 5/8" | 1" | 15 1/16" | €718.41 | |
A | 5NRD7 | 17.5" | 11.75 | 21.875 | 27" | 30 11/16" | 21 7/8" | 1" | 17 13/16" | €1,258.12 |
Belt Drive Double Inlet Forward Curve Blowers
Dayton belt drive double inlet forward curve blowers provide fresh air supply in confined spaces. They are used with heating, air conditioning and ventilation systems. These blowers are made of galvanised steel and have a reinforced wheel to ensure optimal performance. They are equipped with steel wheels in corrosion-resistant finish for manoeuvrability and housing support with resilient pads to minimise vibrations. The prelubricated, sealed ball bearings with rubber isolators provide smooth operation. Dayton direct drive blowers can replace most blowers with the same horsepower ratings. Choose from a wide range of direct drive blowers, available in 6-5/16, 7, 8.375, 9-11/16, and 11.75 inch discharge height variants on Raptor Supplies.
We are here to help!
Looking for a part not listed here?
Explore More
- Solid Joint Pliers
- Enclosure Coolers
- Tool Hangers
- Aluminized Aprons
- Thermal Units
- Tool Storage and Transfer Tanks
- Hose Clamps
- Shipping Supplies
- Tire and Wheel
- Wire Cloth
- WESTWARD Nut Driver Hex 9mmSteel
- ENPAC Caster Frames
- FUNNEL KING Capped Funnels
- EATON Danfoss DSV1-10 Series Check Valves
- AIR SYSTEMS INTERNATIONAL Hansen 3000 Series Quick Coupler Plugs
- WESTWARD Folding Rules
- PHOENIX Replacement Stud Extenders
- NIBCO Small Automatic Cartridges
- BOSTON GEAR 12 Diametral Pitch Cast Iron Spur Gears