CHERNE Hub-Fit Gripper Plugs
Cherne Hub-Fit Gripper plugs are used in bell-end pipes and hub fittings for stack testing and DWV (Drain, Waste & Vent) testing.
Filter
Type: Mechanical
Style | Model | Nominal Size | Range | Max. Back Pressure | Length | Material | Price | |
---|---|---|---|---|---|---|---|---|
A | 270528 | 2" | 2.25" To 2.45" | 13 psi/30 ft. | 1.9" | Glass Reinforced ABS Plastic | €13.52 | |
A | 270538 | 3" | 3.44" To 3.53" | 13 psi/30 ft. | 2.4" | Glass Reinforced ABS Plastic | €20.07 | |
A | 270548 | 4" | 4.41" To 4.53" | 13 psi/30 ft. | 2.4" | Glass Reinforced ABS Plastic | €24.23 |
Features
- They have glass-reinforced ABS plastic construction with galvanised carriage bolts for high load-bearing capacity and corrosion resistance.
- These plugs are pressure rated to conduct DWV tests.
- They are equipped with natural rubber O-rings to ensure positive sealing.
- These plugs have a yellow colour for high visibility in the pipe.
Frequently Asked Questions
What is the maximum back pressure of these Cherne Hub-Fit Gripper plugs?
13 PSI.
What temperature can the gripper plugs handle?
These gripper plugs can be operated at temperatures up to 125 degrees F.
Does Cherne offer flow-through plugs?
Yes, Cherne offers T-Handle Gripper as a flow-through plug.
We are here to help!
Looking for a part not listed here?
Explore More
- Cleaning Supplies Holders
- File Cabinet and Cam Locks
- General Turning Tools
- Incident Command and Triage Supplies
- Milling Machine T-Nuts
- Data and Communication
- Paint and Wallpaper Tools
- Pipe and Test Plugs and Accessories
- Turning Tools
- Door and Door Frames
- GENERAL CABLE Category 5e Cable
- DORIAN Boring Bar 1 Inch
- PARKER Ball Valves, Polypropylene
- LIFT PRODUCTS LPT-100-36 Series, Scissor Lift Table
- MJ MAY Fiberglass Fabric, 0.010 Inch Thickness
- FERVI Floor Drill Press
- SOUTHWIRE COMPANY Step Drill Bit
- MARTIN SPROCKET 20 Deg. Angle Machined Gear Racks, 12 Diameteral Pitch
- HONEYWELL Calibration Gas
- JOHNSON CONTROLS Mounting Brackets