CHERNE End-Of-Pipe Gripper Plugs
Cherne end-of-pipe gripper plugs are designed for applications in DWV (drain, waste and vent) testing and stack testing. They seal only at the end of a pipe, thereby preventing the plug from falling into the stack.
Filter
Material: ABS Plastic , Type: Mechanical
Style | Model | Nominal Size | Range | Max. Back Pressure | Length | Price | |
---|---|---|---|---|---|---|---|
A | 270210 | 1 1/2" | 1.48" To 1.65" | 17 psi/40 ft. | 1.75" | €7.78 | |
A | 270229 | 2" | 1.9" To 2.17" | 17 psi/40 ft. | 1.87" | €8.27 | |
A | 270237 | 3" | 2.8" To 3.1" | 17 psi/40 ft. | 2.5" | €11.83 | |
A | 270245 | 4" | 3.8" To 4.06" | 17 psi/40 ft. | 2.5" | €13.93 | |
A | 270261 | 6" | 5.77" To 6.08" | 17 psi/40 ft. | 3.75" | €42.32 | |
A | 270270 | 8" | 7.7" To 8.03" | 17 psi/40 ft. | 3.75" | €77.04 |
Features
- Cherne end-of-pipe gripper plugs are rated for 17 PSI or 40 ft of head pressure.
- They feature extra large zinc wing nuts for comfortable tightening with no wrench required.
- They are provided with a natural rubber O-ring for improved expansion and memory.
- These gripper plugs have ABS glass-reinforced plates for heat, chemical and abrasion resistance.
Standards and Approvals
- OSHA
Frequently Asked Questions
How to install Cherne end-of-pipe gripper plugs?
- Position the plug into the pipe or cleanout tee. The user then needs to loosen (do notremove) the wingnut, nut, or handle.
- Finally, hand-tighten the nut, wingnut, or handle.
How can users store end-of-pipe gripper plugs?
End-of-pipe gripper plugs should be stored in a dry place away from sunlight or ultra-violet light and ozone sources. They can be either suspended vertically or positioned horizontally (below 110 degrees F).
What precautions should be taken before installing Cherne end-of-pipe gripper plugs?
- Choose the correct plug size fitting your pipe.
- Measure the maximum back pressure that the plug can handle.
- Remove any debris or foreign substances from the pipe to decrease plug damage. Clean the plug with mild soap & water without using any cleaning agent.
- Inspect the plug for corrosion, cuts, cracks, leaks or loose fittings.
We are here to help!
Looking for a part not listed here?
Explore More
- Rubber Locking Gaskets
- Trimmer Accessories
- Ground Rods
- Floor Coating Spiked Shoes
- Polypropylene Tubing
- Janitorial Carts and Supply Holders
- Lab Instruments
- Furniture
- Safety Storage
- Safety Switches
- BLUCHER Wye, 45 Degrees
- JARKE Stack Rack Post Set
- LUMAPRO Miniature Incandescent Bulb, G3 1/2, 2.5V
- APPROVED VENDOR Set Screw Coupling
- WHIPCHECK Style WSR Wire Rope
- INTERNATIONAL ENVIROGUARD Enviromat Series, Floor Mat
- SPEARS VALVES CPVC Schedule 80 Fitting Special Reinforced Unions, EPDM
- EBERBACH Coupling Assemblies
- SLOAN Control Modules
- SMC VALVES Cu Series Compact Cylinder