CANARM Wall Exhaust Fans
Filter
Bearing Type: Ball Bearing , Flange Depth: 1-1/4" , Flange Width: 1.25" , Frame Finish: Powder Coated, Polyester , Frame Material: Steel , Full Load Amps: 6.6/3.3 , Hazardous Location Class: 1 C,D/ 2 F,G , Height: 7.125" , Hz: 60 , Inside Dia.: 8.2" , Max. Ambient Temp.: 104 F , Motor Enclosure: Explosion Proof EPFC , Motor HP: 1/3 , Motor Insulation: B3 , Motor RPM: 1800 , Motor Type: EPFC , Mounting Position: Horizontal , Number of Blades: 3 , Outside Dia.: 7-1/8" , Phase: 1 , Propeller Material: Aluminum , Shaft Dia.: 1/2" , Type: Explosion Proof , Venturi Clearance Dia.: 1/8" , Venturi Depth: 2-7/16" , Voltage: 115/230 , Watts: 250 , Width: 568866"
We are here to help!
Looking for a part not listed here?
Explore More
- Hydraulic Bulk Hoses
- Sponges and Scouring Pads
- Energy Recovery Ventilators
- Pallet Tamper Resistant Kits and Tools
- Polypropylene Pipe Fittings
- Hot Water Circulating Pumps
- Wheelbarrows and Wheelbarrow Accessories
- Ergonomics
- Ballasts
- Machinery
- POLYSCIENCE Liquid-to-air Cooler Pump
- ZURN 50 gpm Polyethylene Drain Interceptor
- QUANTUM STORAGE SYSTEMS Mesh Door Cabinets
- PASS AND SEYMOUR Flexcor Series 1/2 Inch NPT Nylon Strain Relief Cord Grips
- HOFFMAN Climaguard Series WCHE14 Indoor Heat Exchangers
- DAYTON Push Bottom Assemblies
- TENSABARRIER Rigid Barrier Angle Posts
- ADVANTECH Sieve Pans
- TIMKEN Mounted Ball Bearings
- VESTIL CST-F40-DT Series High-Tech Non-Marking Polyurethane Casters