Tubeaxial Fan Accessories
Discharge Caps
Dayton discharge caps are ideal for converting a tubeaxial fan into an upblast ventilator, used for exhausting air in industrial and commercial facilities. These stack caps feature heavy-duty galvanised steel construction with two opposed blade dampers that are mounted on a vertical roof fan and protected with a wind band for maximum air exhaustion. The dampers also protect the building's interior from precipitation when fans are not operating. Choose from a wide range of these discharge caps, available in heights ranging from 26 to 65 inches.
Dayton discharge caps are ideal for converting a tubeaxial fan into an upblast ventilator, used for exhausting air in industrial and commercial facilities. These stack caps feature heavy-duty galvanised steel construction with two opposed blade dampers that are mounted on a vertical roof fan and protected with a wind band for maximum air exhaustion. The dampers also protect the building's interior from precipitation when fans are not operating. Choose from a wide range of these discharge caps, available in heights ranging from 26 to 65 inches.
Style | Model | Depth | Dimension A | Dimension B | Dimension D | Dimension E | Height | Width | Price | |
---|---|---|---|---|---|---|---|---|---|---|
A | 165596 | €1,228.62 | ||||||||
A | 778820 | €1,972.44 | ||||||||
A | 169804 | €2,218.15 | ||||||||
B | 4YM54 | €1,367.00 | ||||||||
B | 4YM55 | €1,722.85 | ||||||||
B | 5JKF5 | €1,797.56 | ||||||||
B | 4YM56 | €1,923.98 | ||||||||
B | 4YM57 | €2,185.34 | ||||||||
B | 4YM58 | €2,422.94 | ||||||||
B | 4YM59 | €2,850.44 | ||||||||
B | 4YM60 | €3,484.01 | ||||||||
B | 4YM61 | €4,053.96 | ||||||||
B | 5JKF2 | €4,098.98 | RFQ | |||||||
B | 5JKF3 | €4,408.01 | RFQ |
PLDA Series Inspection Doors
Airmaster FAN PLDA Series inspection doors provide convenient access for the inspection, maintenance and cleaning of ventilation equipment. These inspection doors have cast aluminium propellers for structural rigidity and spark & corrosion resistance. They can be mounted in round ducts and have ball bearings with NEMA-rated frame motors for enhanced performance and safety.
Airmaster FAN PLDA Series inspection doors provide convenient access for the inspection, maintenance and cleaning of ventilation equipment. These inspection doors have cast aluminium propellers for structural rigidity and spark & corrosion resistance. They can be mounted in round ducts and have ball bearings with NEMA-rated frame motors for enhanced performance and safety.
Curb Cap
Dayton curb caps are roof fan accessory units that convert a tubeaxial fan into an upblast ventilator. These curb caps feature heavy duty steel construction for durability and charcoal baked enamel coating with UV inhibitors for protection against corrosive fumes and preventing degradation from UV rays. They are compatible with Dayton tubeaxial fans (not recommended for smoke exhausted tubeaxial fans) having diameters ranging from 16 to 60 inches.
Dayton curb caps are roof fan accessory units that convert a tubeaxial fan into an upblast ventilator. These curb caps feature heavy duty steel construction for durability and charcoal baked enamel coating with UV inhibitors for protection against corrosive fumes and preventing degradation from UV rays. They are compatible with Dayton tubeaxial fans (not recommended for smoke exhausted tubeaxial fans) having diameters ranging from 16 to 60 inches.
Fan Guard, 3/16" Depth
Dayton fan guards act as physical barriers to prevent accidental contact with the spinning blades; installed within 8 feet of floor or working level. These guards are made of steel wire and designed to provide maximum durability and effective cooling / ventilation. All units comply with OSHA safety standards and are coated with baked-on gray polyester for wear and corrosion resistance. They are compatible with direct-drive tubeaxial fans with a maximum depth of 3/16 inches.
Dayton fan guards act as physical barriers to prevent accidental contact with the spinning blades; installed within 8 feet of floor or working level. These guards are made of steel wire and designed to provide maximum durability and effective cooling / ventilation. All units comply with OSHA safety standards and are coated with baked-on gray polyester for wear and corrosion resistance. They are compatible with direct-drive tubeaxial fans with a maximum depth of 3/16 inches.
Tubeaxial Fan Vane Sections
Dayton tube axial fan vane sections provide a straight airflow by increasing the pressure and efficiency of tube axial fans. These vane sections have mounting flanges and predrilled holes on both ends for easy installation. They are made from durable steel w/ baked enamel finish for long life. Choose from a wide range of these tube axial fan vane sections, available in 24, 30 and 48 inch diameters on Raptor Supplies.
Dayton tube axial fan vane sections provide a straight airflow by increasing the pressure and efficiency of tube axial fans. These vane sections have mounting flanges and predrilled holes on both ends for easy installation. They are made from durable steel w/ baked enamel finish for long life. Choose from a wide range of these tube axial fan vane sections, available in 24, 30 and 48 inch diameters on Raptor Supplies.
ST Valve Double Female, Full Flow Dispenser, 1/4 X 1/4 Inch NPT, Glass
Model | Item | Price (ex. VAT) | |
---|---|---|---|
32404 | AK7GXK | €75.79 | See Details |
ST Valve Double Female, Full Flow Dispenser, 1/4 X 1/4 Inch NPT, Acrylic
Model | Item | Price (ex. VAT) | |
---|---|---|---|
32408 | AK7GYL | €75.79 | See Details |
Tubeaxial Fan Accessories
Tubeaxial fan accessories facilitate high quality ventilation, exhaustion or supply of air in low to high pressure ducted applications. Raptor Supplies offers these accessories from brands like Airmaster Fan and Dayton. Curb caps and discharge caps convert a tubeaxial fan into an upblast roof ventilator. They feature heavy gauge steel construction with a grey, baked enamel finish & galvanised steel wind band to reduce oxidation reactions on exposed surfaces. These accessories also include OSHA compliant fan guards to prevent accidental injuries from fan blades and tubeaxial fan vane sections with mounted flanges for proper airflow, increased pressure & improved efficiency.
Explore More
- Relays
- Document Covers Displays and Frames
- Bushings
- Dock Equipment
- Welding Ovens and Accessories
- Voltage and Continuity Testers
- Power Concrete Screed Blades
- Toolboard and Bin Storage Trucks
- Vertical Pump Motors
- Belt Tensioners and Tension Pulleys
- LOVIBOND Sulfate 4 Reagent Polypropylene
- BANJO FITTINGS Flanged Inlet, Stainless Steel
- USA SEALING Tubing, 3/8 Inch
- COXREELS SD Series Cable Reels
- ALVORD POLK Short Series Solid Carbide Reamers
- LINN GEAR Double Single Taper-Lock Series Sprockets, 140 Chain
- HUMBOLDT Erlenmeyer Flasks
- GROVE GEAR EL Series, Size 818, Aluminum Worm Gear Reducers
- DYNABRADE Backup Pads
- 80/20 End Caps