MORSE CUTTING TOOLS Tool Bits
MORSE CUTTING TOOLS -
Rotary File Bits
Style | Model | Price | |
---|---|---|---|
A | 59647 | €202.92 | RFQ |
B | 83435 | €34.65 | RFQ |
C | 83401 | €32.76 | RFQ |
D | 83402 | €44.84 | RFQ |
E | 83406 | €32.24 | RFQ |
F | 83413 | €32.24 | RFQ |
G | 83416 | €61.26 | RFQ |
G | 83418 | €183.31 | RFQ |
H | 83434 | €182.87 | RFQ |
I | 83464 | €144.90 | RFQ |
J | 83390 | €34.10 | RFQ |
I | 83465 | €218.97 | RFQ |
K | 59642 | €224.32 | RFQ |
L | 59716 | €31.16 | RFQ |
L | 59719 | €41.45 | RFQ |
M | 59740 | €37.70 | RFQ |
M | 59741 | €55.90 | RFQ |
N | 59752 | €51.26 | RFQ |
O | 59757 | €34.55 | RFQ |
J | 83393 | €69.83 | RFQ |
P | 83387 | €37.11 | RFQ |
Q | 59770 | €39.75 | RFQ |
D | 83500 | €180.16 | RFQ |
R | 83447 | €40.78 | RFQ |
I | 83461 | €64.45 | RFQ |
Style | Model | Price | |
---|---|---|---|
A | 70109 | €15.44 | RFQ |
A | 70139 | €37.61 | RFQ |
A | 70233 | €30.74 | RFQ |
A | 70227 | €20.22 | RFQ |
A | 70226 | €20.12 | RFQ |
A | 70221 | €16.32 | RFQ |
A | 70215 | €15.39 | RFQ |
A | 70214 | €15.39 | RFQ |
A | 70203 | €14.13 | RFQ |
A | 70133 | €30.74 | RFQ |
A | 70115 | €15.39 | RFQ |
A | 70114 | €15.39 | RFQ |
A | 70103 | €14.13 | RFQ |
A | 70209 | €15.44 | RFQ |
A | 70132 | €29.06 | RFQ |
A | 70127 | €20.22 | RFQ |
A | 70126 | €20.12 | RFQ |
A | 70121 | €16.32 | RFQ |
A | 70239 | €37.61 | RFQ |
MORSE CUTTING TOOLS -
External Turning Tool Bits
Frequently Asked Questions
How can I sharpen my Morse cutting tool bits?
To sharpen tool bits, hold the bit steady using a vice if sharpening by hand, then file at a 60-degree angle. Continue filling over the edges until they feel sharper. However, you can also use a bench grinder.
What is the significance of the drill bit angle in these tool bits and cutting inserts?
Drills have included angles of 118 degrees and 135 degrees. These angles were predominantly done manually, using conventional conical-shaped drill bits.
How is the drill point angle measured when using tool bits cutting inserts?
The point angle also known as the cutting angle, refers to the angle between two lips when projected onto a plane parallel to the axis. It's the angle between the lips as seen from the side view of a twist drill.
Explore More
- Replacement Parts
- Power Saws and Accessories
- Mobile Bin Carts and Workstations
- Paint Sprayers and Accessories
- Conduit Wire and Pipe Storage
- Sanitary Gaskets
- Crawl Space and Basement Fans
- Mortise Locksets
- Cargo Bars and Hoops
- Air Knives
- GKS-PERFEKT General Purpose Dolly
- GERBER PLUMBING Ceramic Disk Cartridge
- WALTER TOOLS ADGT Indexable Insert
- MARS AIR DOORS Hv2 Series, Air Curtain
- VESTIL CMD Series Corner Mover Dollies
- DURHAM MANUFACTURING Keys
- GORLITZ Wheels
- EATON Rotary Mechanisms
- WESTWARD Transmission Lifts
- CARRIER TRANSICOLD Hot Surface Ignitors